We've hand-picked these items because they are a great choice alongside the Clearwater Eclipse Triple Lever Mono Kitchen Mixer and Cold Filtered Water Tap - Polished Chrome
Enjoy perfectly pure, filtered water straight from your tap, helped along by the Pure FlowPro feature. The Pure FlowPro attaches to the pipework and shows you how much life is left in your filter in three measures: by days, litres or a live flow rate—all shown on a digital monitor.
The monitor will beep twice when the capacity falls to less than 30 gallons—notifying you to change the filter—which couldn’t be a simpler task. This will not only save you money but also help to ensure your home is as environmentally friendly as possible; reducing the wasting of filters that might still have some life left. The battery-powered monitor turns off when it detects that there’s been no water flow for 10 seconds too, so you won’t need to worry about changing the batteries every five minutes!
- Stunning polished chrome finish - also available in a brushed nickel finish
- Cold, filtered water straight from your kitchen tap
- Filter kit & connections included
- Includes Pure FlowPro - tells you exactly when your filter needs changing
- 360° swivel spout
- Compatible with water softeners and reverse osmosis systems
- 35mm mounting hole
- Minimum water pressure of 0.5 bar required
- 5 year manufacturer’s guarantee
- Overall height - 404mm
- Spout exit height - 269mm
- Projection - 207mm
|Type||Mono Kitchen Mixers, Filtered Water Taps|
|Brand Range||Clearwater Eclipse|
|GuaranteeMore information||5 Years|
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information||Ceramic Disc|
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Mounting Type||Deck Mounted|
|Handle Type||Lever, Triple Control|
|Minimum Tap Hole SizeMore information||35mm|
This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.
|Minimum Water PressureMore information||0.5|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.