-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
Features:
Dimensions:
Please note: The filter in our recommended extras is only suitable for Clearwater filter taps purchased since January 2019. For Clearwater filter taps purchased before January 2019 you will require this Clearwater Filter.
- Available in 3 different finishes with 4 coloured hose options available - customise your tap to suit your kitchen
- Provides unfiltered hot & cold and filtered cold from two separate nozzles
- Includes filter and connectors
- The Pure Filter removes impurities to give the water a clean, fresh taste to rival bottled water
- Includes Pure FlowPro - lets you know exactly when your filter needs changing
- Dual function spray allows you to switch between a standard aerated flow and a powerful spray, providing flexibility for various kitchen tasks
- Nickel and Gun Metal finishes are PVD coated - helps to withstand surface damage and Nano technology provides a more hygienic surface
- 360° swivel spout and detachable silicon spout mean that all areas of your sink are in reach for easy cleaning
- Minimum 1 bar water pressure required
- Compatible with the Pure Chiller 100 for instant chilled water - Available separately here
- Suitable with water softeners and reverse osmosis systems
- Ceramic disc technology
- 5 year guarantee
Dimensions:
- Overall height - 495mm
- Spout exit height - 190mm
- Projection - 220mm
- Mounting hole diameter - 35mm
Please note: The filter in our recommended extras is only suitable for Clearwater filter taps purchased since January 2019. For Clearwater filter taps purchased before January 2019 you will require this Clearwater Filter.
| Cleaning Instructions |
|---|
| Product Code | clearwater-bellatrix-pv |
|---|---|
| Type | Filtered Water Taps, Mono Kitchen Mixers, Pull Out Kitchen Taps |
| Brand | Clearwater |
| Brand Range | Clearwater Bellatrix |
| GuaranteeMore information | 5 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| AeratorMore information | Yes |
|---|---|
| Cartridge TypeMore information | Ceramic Disc |
| Popular Features | Select an option first |
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Shape | Round |
| Handle Type | Dual Control, Lever |
| Spout Type | 360 Degree Swivel Spout, Dual Function Spray Spout, Pull Out Spout, Swan Neck Spout |
| Tap Holes | Mono |
| Style | Modern |
| Finish | Select an option first |
| Texture | Select an option first |
| Minimum Tap Hole Size (mm)More information | 35 |
|---|---|
| Height (mm) | 495 |
| Projection (mm) | 220 |
This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.
| Minimum Water PressureMore information | 1 |
|---|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Related categories
We're here for you
Advice guides
-
Filtered Water Taps Buying Guide
Perfectly filtered water at the turn of a handle? Yes please! This guide outlines the benefits of filtered water taps, explores how they work and outlines some of our favourite designs.
