-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
Combining timeless elegance with modern functionality the Harbour Traditional 3-in-1 Instant Boiling Water Tap offers domestic hot and cold water along with filtered 98°C water. Available with white ceramic resin levers, its transitional design seamlessly fits both traditional and contemporary kitchens, and frees up valuable countertop space by eliminating the need for bulky kettles. Packed with safety features, it includes an insulated spout and handles to prevent scalding and a safety interlock and spring handle to avoid accidental boiling water dispensing. Dual levers allow effortless access to domestic hot and cold water, as well as filtered boiling water, while the 360-degree swivel spout ensures all areas of your sink are easily accessible.
Discover the power within the included 3 litre compact boiler, designed to effortlessly serve even the most active households while neatly packed away in your cupboard. Its advanced digital display not only showcases the set temperature but also alerts you to filter changes, offering a choice of 7 preset temperatures from a soothing 75°C to a piping hot 98°C. Engineered with superior thermal insulation, this boiler keeps noise levels low while maintaining heat efficiency. Plus, its eco mode intelligently conserves energy when you're away.
Features:
Discover the power within the included 3 litre compact boiler, designed to effortlessly serve even the most active households while neatly packed away in your cupboard. Its advanced digital display not only showcases the set temperature but also alerts you to filter changes, offering a choice of 7 preset temperatures from a soothing 75°C to a piping hot 98°C. Engineered with superior thermal insulation, this boiler keeps noise levels low while maintaining heat efficiency. Plus, its eco mode intelligently conserves energy when you're away.
Features:
- 3 functions - domestic hot & cold water and up to 98°C water
- Two easy-to-use white ceramic levers - one to control domestic hot & cold water and one to operate 98°C filtered water
- Insulated spout and handles to prevent scalding
- Water-saving - dispense the right amount of boiling water on demand, no more boiling excess water in a kettle!
- Safety interlock and spring handle to avoid accidental selection of boiling water
- 360 degree swivel spout making all areas of your sink accessible
- Minimum 0.5 bar water pressure required
- Aerated spout mixes air into the water to give a soft, champagne-like flow
- Complies with BSEN817 and BSEN200 ensuring a high quality standard
- Brass body and zinc alloy handles providing durability and high corrosion resistance
- Comes with flexi tails and fast-fit flexible connection hose
- Includes tap, tank and a high quality, carbon filter
- Guarantee: 2 years
- 3 litre tank - a large capacity in a tank small enough to still fit snugly in your sink cupboard
- WRAS approved
- Features an eco mode meaning the tank goes into standby mode to save energy when you’re away from home
- Intuitive tank display - displaying set temperature and filter change reminders
- 7 presets to choose between 75°C and 98°C
- Heavy thermal insulation retains heat and reduces noise
- Improved thermistor manufactured using titanium helping lower limescale build up
- The bladder, designed to push unused water back into the main water supply, is crafted from 66% strong polyamide and 30% glass fibre meaning it is extremely robust
- Includes descaling medi kit
Boiler Features:
The filter has a 6 month lifespan - enough for 3800 litres of water. Replacement filters can be purchased separately, please see our recommended extras.
| Cleaning Instructions |
|---|
| Product Code | KIT-701-CP-T |
|---|---|
| Type | Boiling Water Taps, Mono Kitchen Mixers |
| Brand | Harbour |
| GuaranteeMore information | 2 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| AeratorMore information | Yes |
|---|---|
| Material | Brass, Zinc Alloy |
| Cartridge TypeMore information | Ceramic Disc |
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Finish | Chrome |
| Shape | Round |
| Handle Type | Dual Control, Lever |
| Spout Type | 360 Degree Swivel Spout, Swan Neck Spout |
| Texture | Polished |
| Tap Holes | Mono |
| Style | Traditional |
| Minimum Tap Hole Size (mm)More information | 35 |
|---|---|
| Width (mm) | 175 |
| Height (mm) | 398 |
| Projection (mm) | 208 |
This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.
| Flow Rate at 0.5 Bar (l/min) | 4.8 |
|---|---|
| Flow Rate at 1 Bar (l/min) | 6.7 |
| Flow Rate at 2 Bar (l/min) | 9.3 |
| Flow Rate at 3 Bar (l/min) | 11.4 |
| Minimum Water PressureMore information | 0.5 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Related categories
We're here for you
Advice guides
-
These Are Our Favourite Kitchen Ideas 2025
Need some kitchen design inspiration? From choosing the perfect taps to new design styles, we take you through our picks for the top kitchen trends of 2025. -
How do Boiling Water Taps Work?
From water temperatures and pressure to cost and installation, we take you through everything you need to know about boiling water taps.
