We've hand-picked these items because they are a great choice alongside the Crosswater Glide II Wall Mounted Basin Mixer Tap
- Available in 4 different finishes - Polished Chrome, Matt Black, Brushed Brass and Stainless Steel Effect
- Part of the new, ultra-sleek Glide II range of brassware from Crosswater
- Pair with one of our countertop basins for the ultimate luxury bathroom look
- Easy to use single lever design
- Ceramic disc cartridges - requires very little effort to turn the tap on and off and ensures that there is no dripping once off
- Basin waste sold separately - click here to see our range of Crosswater wastes
- Minimum 1 bar water pressure required
- 15 year guarantee from Crosswater - (subject to online registration - please click here for further details)
- Backplate height: 70mm
- Total exposed depth: 200mm
- Projection: 181mm
|Wall Mounted Basin Taps
|Crosswater Glide II
|Global Trade Item Number
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Lever, Single Control
|Straight Spout, Fixed Spout
|Minimum Water PressureMore information
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
Need more help?
It can be tricky to know the best way to approach bleeding a radiator and how often we should be doing it. So, here is our heating expert with all the answers.
Save money in the kitchen with one of these nifty appliances that'll also give you back precious minutes waiting at the kettle.
Got everything but the kitchen sink? Here's some amazing sink ideas costing you less than £200.
Which are the best electric showers? Our experts recommend 3 of the best electric showers to have at home.
If you’re considering buying an electric shower or just keen to know more, take a closer look at all the benefits of owning one in our expert article.