Skip to navigation Skip to content

Burlington Kensington 2 Tap Hole Arch Basin Mixer with Curved Spout

No reviews yet - Write one

RRP £400 save 27%

From £293.99

Please select an option

Loading delivery estimate...

Pay 3 interest-free instalments of £97.99 with Klarna Learn more about Klarna
Pay 4 interest-free instalments of £73.50 with Clearpay Learn more about Clearpay

What's great about it?

  • Arched bridge basin mixer with swan neck spout & twin levers
  • 2 sizes available: Standard or Regent
  • Hard-wearing brassware with corrosion-resistant chrome plating
  • Neoperl aerator & flow straightener included
  • Suitable for all water pressure systems

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Burlington Kensington 2 Tap Hole Arch Basin Mixer with Curved Spout

Arguably the most regal and stunning tap within the Kensington range, this Arch Basin Mixer combines intricate detailing with a wonderfully curved spout to create a traditional tap to remember. The body is crafted from the finest solid brass, accented with white ceramic tap levers and indice, and finished in a stylish polished chrome. Despite the period design this mixer is packed full of contemporary technology. Ceramic disc cartridges control the water flow and temperature with a simple quarter-turn of the handle, and a Neopearl flow straightener and aerator is supplied with it to ensure you get a consistent, steady stream of water with every use.

  • Deck mounted, 2 tap hole arch basin mixer
  • Suitable for low and high water pressure
  • Ceramic disc cartridges
  • Manufactured from solid brass and white ceramic
  • Supplied with a Neopearl aerator and flow straightener
  • 10 year guarantee

  • Height - 300mm
  • Width - 360.9mm
  • Depth - 163mm

Product Overview
Product Code burlington-kensington-arch-bm-pv
Type 2 Hole Basin Mixers, Bridge Basin Mixers
Brand Burlington
Brand Range Burlington Kensington
GuaranteeMore information 10 Years


Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Material Brass
Cartridge TypeMore information Ceramic Disc
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Mounting Type Deck Mounted
Finish Chrome
Shape Round
Handle Type Dual Control, Lever
Spout Type Fixed Spout, Swan Neck Spout
Texture Polished
Tap Holes 2 Holes
Style Traditional
Width (mm) 361
Depth (mm) 163
Projection (mm) 163
Flow Rate
Minimum Water PressureMore information 0.2

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

No reviews yet - Write one

From £293.99

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.