Skip to navigation Skip to content

Vado Victoriana Wall Mounted Bath Shower Mixer with Shower Kit

No reviews yet - Write one

RRP £330.00 save 5%


Loading delivery estimate...

Pay 3 interest-free instalments of £103.99 with Klarna Learn more about Klarna
Pay 4 interest-free instalments of £78.00 with Clearpay Learn more about Clearpay

What's great about it?

  • Wall-mounted bath shower mixer and handset kit with traditional ceramic accents
  • Made from reliable, solid brass and finished in Polished Chrome for a sleek appeal
  • H: 240mm, W: 215mm, D: 150mm
  • Fitted with ceramic disc valve technology for easy turning and leak-free longevity
  • Separate hot and cold water flows allows for easier control over your bath's temperature
  • 10 year manufacturer's guarantee

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Vado Victoriana Wall Mounted Bath Shower Mixer with Shower Kit

Vado Victoriana Wall Mounted Bath Shower Mixer with Shower Kit

All bathroom fixtures with contemporary design elements need not have just sleek lines and a streamlined look. Take for instance the Vado Victoriana Wall Mounted Bath Shower Mixer with Shower Kit - it was also designed with contemporary design elements but there are some old-school elements to it that add to its overall charm. This can add so much style and character to your old or drab-looking bathrooms. The great thing about it is that it was given a chrome plating finish that makes it shiny but also gives it an added layer of protection from rust so it stays looking brand-new for a longer period of time.

Flow rates at 3 bar pressure:
• Bath: 49 l/min
• Shower: 22 l/min
Downloads Product PDF
Product Code AX-VIC-120/CD-CP
Global Trade Item Number 5052120137482
Type Wall Mounted Bath Shower Mixers
Brand Vado
Width (mm) 215
Brand Range Vado Victoriana
Height (mm) 190
Depth (mm) 150
Mounting Type Wall Mounted
Finish Polished Chrome
Shape Round
Handle Type Crosshead, Lever, Triple Control
Spout Type Curved Spout
Minimum Water PressureMore information 0.2
Tap Holes 2 Holes
Style Traditional
Material Brass
GuaranteeMore information 10 Years
Projection (mm) 150
Number of Outlets 2 Outlets
Temperature Control Manual
Cartridge TypeMore information Ceramic Disc
Flow Rate at 3 Bar (l/min) 49

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.


All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.


Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.