Skip to navigation Skip to content

Perrin & Rowe Phoenician C Spout 3-in-1 Instant Hot Water Mixer Tap

No reviews yet - Write one
Please select an option

Loading delivery estimate...

What's great about it?

  • 3 in 1 sink mixer for filtered cold, hot and up to 98°C boiling water
  • 3 finishes available: Chrome, Nickel or Pewter
  • Child-proof mechanism to release the boiling water function for added safety
  • Designed for easy installation
  • Suitable for high water pressure systems

Read full product description

Just because you have a traditional-style kitchen, it doesn't mean that you should have to go without modern technology. The Perrin & Rowe Phoenician 3-in-1 instant hot water tap delivers instant hot water at the turn of a handle, but unlike many boiling water taps, it also delivers standard mains hot and cold water through the same spout.

The water temperature on the Phoenician instant hot water tap can be pre-set in a range from 75°C to 98°C on the state-of-the-art digital touchscreen. It also features the latest filtration technology which is designed to remove the impurities from your water supply, leaving you with fresh, pure drinking water. This nano filter technology also reduces the amount of limescale that goes through your tap, therefore increasing its life.

The Perrin & Rowe Phoenician 3-in-1 kettle tap is available in three stunning finishes. Choose between chrome, nickel or pewter for the one that best matches the décor in your kitchen, and become the envy of all your friends and family.

Quality Promise:
  • Manufactured in the UK from the highest quality raw materials
  • Employing the latest available technology and made from low lead brass
  • Plated to a thickness that exceeds industry standards
  • Assembled by hand and individually water tested to ensure peace of mind
  • Made with ceramic disk valves supplied by the world’s leading manufacturer, tested to 5000,000 life cycles, equating to at least 25 years of domestic use.

Made in Britain


Features:
  • Available in chrome, nickel or pewter finish
  • Pre-set temperature ranging from 75°C to 98°C
  • Ceramic disc technology
  • Minimum 1.5 bar water pressure
  • Filtration technology
  • Water saving, time saving and energy efficient
  • High-quality cartridge removes chemicals, bacteria and other contaminants
  • 1 year guarantee on finish
  • 5 year guarantee on parts

Dimensions:
  • Overall height - 370mm
  • Spout exit height - 235mm
  • Projection - 225mm

Please note: The pewter finish is not shown in the main image. Please check the colour chart for an idea as to how the pewter finish will look.

Downloads
Cleaning Instructions
Product Overview
Product Code 1937-pv
Type Boiling Water Taps, Filtered Water Taps, Mono Kitchen Mixers
Brand Perrin & Rowe
Brand Range Perrin & Rowe Phoenician
GuaranteeMore information 1 Year

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 
Features
Cartridge TypeMore information Ceramic Disc
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Style
Mounting Type Deck Mounted
Shape Round
Handle Type Dual Control, Lever
Spout Type Swan Neck Spout, Swivel Spout
Tap Holes Mono
Style Traditional
Finish Select an option first
Texture Select an option first
Dimensions
Height (mm) 370
Projection (mm) 225
Flow Rate
Minimum Water PressureMore information 1.5

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

(0)
No reviews yet - Write one

From £1,138.99

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.