Skip to navigation Skip to content

Clearwater Mercury Pull Out Single Lever Monobloc Kitchen Mixer - Stainless Steel

Rated 5.00/5 from 8 customer reviews

RRP £282.00 save 15%


Loading delivery estimate...

Pay 3 interest-free instalments of £79.99 with Klarna Learn more about Klarna
Pay 4 interest-free instalments of £60.00 with Clearpay Learn more about Clearpay

What's great about it?

  • Modern monobloc kitchen mixer with side lever & pull-out spout
  • Constructed from pure stainless steel
  • Single lever design for effortless one-hand control
  • 360° rotation spout for ease-of-use and extra accessibility
  • Suitable for high water pressure systems

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Clearwater Mercury Pull Out Single Lever Monobloc Kitchen Mixer - Stainless Steel

Clearwater Mercury Pull Out Single Lever Monobloc Kitchen Mixer - Stainless Steel

Here at Tap Warehouse we love stainless steel kitchen taps, and yet we see surprisingly few of them - at least compared to the amount of chrome and nickel taps that we see. One reason that we used to see less stainless steel taps is because they used to be significantly more expensive than their chrome plated counterparts, but nowadays they are much more affordable. This has lead to a far better selection of stainless steel kitchen taps; a selection that includes the fabulous Clearwater Mercury pull out kitchen tap.

The Clearwater Mercury has an understated elegance to it. Indeed, to the untrained eye it looks like any other modern kitchen tap, but therein lies its charm. With a simple pull of the end of the spout you are given an extra 700mm of tap to use. This is perfect for so many tasks, from cleaning your sink, to watering plants on your windowsill, and even filling up pots and buckets without having to lift them in and out of the sink.

Of course, pull out kitchen taps are nothing new, but it's very rare to find a stainless steel pull out kitchen tap, especially one as affordable and stylish as the Clearwater Mercury. And thanks to its ceramic disc cartridges that have been tested for over 200,000 cycles and a 5 year guarantee, the Mercury will take pride of place in your kitchen for years to come.

Other Features:
• High quality solid stainless steel
• Hand finished
• Highly resilient to wear and rust
• Includes anti-splash aerator for a frothy, non-splash flow

• Width - 129mm
• Overall height - 270mm
• Spout exit height - 234mm
• Projection - 230mm
• Minimum tap hole size - 35mm
• Pull out hose length - 700mm
Product Code MER2SS
Global Trade Item Number 5060406293791
Type Mono Kitchen Mixers
Brand Clearwater
Width (mm) 129
Brand Range Clearwater Mercury
Height (mm) 270
Mounting Type Deck Mounted
Finish Stainless Steel
Shape Round
Handle Type Lever, Single Control
Spout Type L-Shaped Spout, 360 Degree Swivel Spout, Pull Out Spout
Minimum Water PressureMore information 1
Tap Holes Mono
Style Modern
GuaranteeMore information 5 Years
Projection (mm) 230
Minimum Tap Hole SizeMore information 35mm
Cartridge TypeMore information Ceramic Disc
AeratorMore information Yes

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.


All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.


This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome. 


Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.