We've hand-picked these items because they are a great choice alongside the Crosswater Exposed Thermostatic Bath Shower Mixer with Integrated Bath Spout
The thermostatic control has an automatic built-in safety stop at 40°C with manual override to ensure a safer showering experience at home. The fail-safe thermostatic control maintains the selected temperature to within 1.5°C degrees either side, giving you reign over precisely controlled water temperature levels.
This beautiful piece has a timeless look to it and you will enjoy this functional beauty for years to come.
Pair it with the Crosswater Shower Kits of your choice for the perfect showering and bathing experience.
- Wall Mounted
- Easy installation
- Failproof temperature control
- Integrated bath spout and shower outlet
- Separated flow and temperature handles
- Ceramic disc anti-drip technology
- Spout projection: 151mm
- 1 bar minimum water pressure
|Global Trade Item Number
|Wall Mounted Bath Shower Mixers
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Number of Outlets
|Cartridge TypeMore information
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Round, Dual Control
|Minimum Water PressureMore information
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.