-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
Features:
Dimensions:
Pure FlowPro Information
Every Clearwater filter tap comes with the Pure FlowPro which attaches to the pipework and shows you how much life is left in your filter in three measures: by days, litres or a live flow rate—all shown on a digital monitor.
The monitor will beep twice when the capacity falls to less than 30 gallons—notifying you to change the filter—which couldn’t be a simpler task. This will not only save you money but also help to ensure your home is as environmentally friendly as possible; reducing the wasting of filters that might still have some life left. The battery-powered monitor turns off when it detects that there’s been no water flow for 10 seconds too, so you won’t need to worry about changing the batteries every five minutes!
- Available in 4 finishes - Chrome, Brushed Nickel, Matt Black and Brushed Brass
- Brushed Nickel and Brushed Brass are PVD coated - helps to withstand damage and provides a more hygienic surface
- Get filtered water on tap - no more bottled water or filter jugs required
- Each Clearwater filter delivers 3800 litres of filtered water and removes impurities and the taste of heavy metals from the water
- Includes filter kit and Pure FlowPro - see below for more information
- Stylish and easy to use single lever for your standard hot and cold water
- Subtly hidden push-control button on the left for the filtered water
- WRAS approved
- Cold start ceramic disc technology to help you save on your energy bill - only cold water is dispensed when the handle is in the upright position unlike most mixer taps
- Compatible with the Pure Chiller 100 for instant chilled water - Available separately here
- 360° swivel spout for maximum flexibility in the kitchen
- Minimum 0.5 bar water pressure required
- 5 year guarantee
Dimensions:
- Overall height - 349mm
- Spout exit height - 250mm
- Projection - 200mm
Pure FlowPro Information
Every Clearwater filter tap comes with the Pure FlowPro which attaches to the pipework and shows you how much life is left in your filter in three measures: by days, litres or a live flow rate—all shown on a digital monitor.
The monitor will beep twice when the capacity falls to less than 30 gallons—notifying you to change the filter—which couldn’t be a simpler task. This will not only save you money but also help to ensure your home is as environmentally friendly as possible; reducing the wasting of filters that might still have some life left. The battery-powered monitor turns off when it detects that there’s been no water flow for 10 seconds too, so you won’t need to worry about changing the batteries every five minutes!
| Cleaning Instructions |
|---|
| Product Code | clearwater-mariner-filter-tap-pv |
|---|---|
| Type | Filtered Water Taps, Mono Kitchen Mixers |
| Brand | Clearwater |
| Brand Range | Clearwater Mariner |
| GuaranteeMore information | 5 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Cartridge TypeMore information | Ceramic Disc |
|---|
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Shape | Round |
| Handle Type | Lever, Single Control |
| Spout Type | 360 Degree Swivel Spout, U-Shaped Spout |
| Tap Holes | Mono |
| Style | Modern |
| Finish | Select an option first |
| Texture | Select an option first |
| Height (mm) | 349 |
|---|---|
| Projection (mm) | 200 |
| Flow Rate at 0.5 Bar (l/min) | 4.4 |
|---|---|
| Flow Rate at 1 Bar (l/min) | 6.24 |
| Flow Rate at 1.5 Bar (l/min) | 7.8 |
| Flow Rate at 2 Bar (l/min) | 9.21 |
| Flow Rate at 3 Bar (l/min) | 11.1 |
| Flow Rate at 4 Bar (l/min) | 13.2 |
| Flow Rate at 5 Bar (l/min) | 14.7 |
| Minimum Water PressureMore information | 0.5 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Related categories
We're here for you
Advice guides
-
Filtered Water Taps Buying Guide
Perfectly filtered water at the turn of a handle? Yes please! This guide outlines the benefits of filtered water taps, explores how they work and outlines some of our favourite designs.
