Skip to navigation Skip to content

Clearwater Madra C Spout 4-in-1 Instant Boiling & Filtered Cold Water Kitchen Mixer Tap

No reviews yet - Write one
New
Select an option:

Loading delivery estimate...

Pay in 3 interest-free payments of £233.33.
Klarna
Pay in 3 interest-free payments of £233.33. Learn more

What's great about it?

  • 4 functions in 1 tap - domestic hot & cold water, filtered cold water and instant filtered boiling water meaning no more bulky kettles taking up countertop space
  • Boiler tank boasts a 2.4-litre capacity - delivers kettle-hot water instantly, capable of supplying up to 60 cups per hour
  • Advanced filtration - protects the boiler from limescale, removes contaminants, improves taste and odour, and uses ultrafiltration to remove bacteria,viruses, and microplastics providing pure, great-tasting water
  • Cool-touch spout - internally insulated to ensure the spout remains safe to touch, even during hot water dispensing
  • Tank allows for effortless temperature control - select between 45°C to 98°C and monitor your desired temperature, ensuring precision and ease of use

Full details

Features:
  • 4 functions - offering domestic hot & cold, filtered cold water & instant filtered boiling water (up to 98°C)
  • 360 degree swivel spout makes all areas of your sink accessible
  • Insulated spout and handles to prevent scalding
  • Safe dispensing - two-stage child-safe mechanism, press down to unlock, then activate the spring-loaded lever to dispense 98°C filtered water
  • Two easy-to-use levers - controlling domestic hot, cold water, 98°C water & filtered cold water
  • Water-saving - dispenses the right amount of boiling water on demand, no more boiling more water than you need in a kettle!
  • Advanced filtration protects the boiler from limescale, removes contaminants, improves taste and odour, and uses ultrafiltration to remove bacteria, viruses, and microplastics, providing pure, great-tasting water.
  • Brushed Nickel and Brushed Brass finishes are PVD coated making them more resistant to scratches and everyday wear & tear and nano technology provides a more hygienic surface
  • Read more about the benefits of PVD coating as well as some aftercare tips in our Aftercare for Special Finishes blog
  • Ceramic disc technology preventing excess dripping and leaking
  • Aerated spout mixes air into the water to give a soft, champagne-like flow
  • Minimum 1 bar water pressure
  • Tap includes a boiler tank and high-quality filter
  • Pair with the Vellamo chiller for refreshingly chilled, filtered water (requires a minimum water pressure of 1.5 bar)
  • 5 year manufacturer’s guarantee

Boiler Features:
  • 2.4 litre capacity compact enough to fit in your sink cupboard but capable of handling everyday boiling water needs
  • Precise digital control - variable temperature accurate to within 0.5°C
  • Automated filter reminder - alerts you when it’s time for a filter replacement, maintaining optimal performance and water quality
  • Effortless temperature control - select between 45°C to 98°C and monitor your desired temperature, ensuring precision and ease of use
  • Quiet operation minimises noise for a more peaceful kitchen environment

  • The filter has a 6 month lifespan - enough for 2000 litres of water. Replacement filters can be purchased separately, please see our recommended extras.

Downloads
Installation Instructions
Cleaning Instructions
Product Overview
Product Code cwtr-madra-c-4-boil-filt-tap-pv
Type Boiling Water Taps, Filtered Water Taps, Mono Kitchen Mixers
Brand Clearwater
Brand Range Clearwater Madra
Guarantee Breakdown Tap: 5 year manufacturer's guarantee | Boiler: 2 year manufacturer's guarantee
GuaranteeMore information Various

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 
Features
AeratorMore information Yes
Material Brass
Cartridge TypeMore information Ceramic Disc
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Style
Mounting Type Deck Mounted
Shape Round
Handle Type Dual Control, Lever
Spout Type Curved Spout, Swan Neck Spout
Tap Holes Mono
Style Modern
Finish Select an option first
Texture Select an option first
Dimensions
Minimum Tap Hole Size (mm)More information 35
Width (mm) 179
Height (mm) 405
Depth (mm) 320
Projection (mm) 207

This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.

Flow Rate
Flow Rate at 1 Bar (l/min) 4
Flow Rate at 1.5 Bar (l/min) 4.9
Flow Rate at 2 Bar (l/min) 5.6
Flow Rate at 3 Bar (l/min) 7
Flow Rate at 4 Bar (l/min) 8.1
Flow Rate at 5 Bar (l/min) 9
Minimum Water PressureMore information 1

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

(0)
No reviews yet - Write one

We're here for you

Rated 'Excellent'

Delighting customers for 10+ years. See reviews

Free delivery over £299

Standard delivery to most of UK, plus discounted next day rates too. See policy

90 days to change your mind

+ optional specialist collection service. See policy

Free consultations

Book a chat with our bathroom experts. More

Trade discounts

Thousands of trade professionals benefit from our extra discounts and dedicated account managers. Access now

Guides & inspiration

We've created an extensive range of design guides to inspire you. See more

As seen in

Good Housekeeping
House Beautiful
Grand Designs
Homes & Gardens
Real Homes
Ideal Home

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.

Share your photos

1) Take a photo of your product and post it to Instagram.

2) Mention us with @tap.warehouse so we can see your photo when you post it.