We've hand-picked these items because they are a great choice alongside the Vellamo Kaffe Matt Black Instant Boiling Tap with WRAS-Approved Digital Boiler & Filter
- Made from high quality brass with a contemporary matt black finish
- Neoperl aerator - creates a soft, splash-free flow of water
- Heat insulation technology - keeps the spout cool to the touch, even when the steaming water is flowing
- Child safe spring lock technology - the handle must be pressed and turned at the same time to release steaming water
- 180° swivel spout - ideal for use with a 1.5 or 2 bowl kitchen sink
- Standard hot and cold water from an easy to use single lever
- Ceramic disc technology - long-lasting and no drips
- Minimum 1.5 bar water pressure required
- Comes with a carbon rod water filter - gives you pure near-boiling water
- Filter can be replaced in seconds - twist, pull and replace
- 2 year guarantee
- Overall height - 349mm
- Spout exit height - 263mm
- Projection - 210mm
- Delivers instantly hot filtered water - adjustable between 75°C-98°C
- Easy to use digital touch screen operation - shows the set temperature and current temperature
- WRAS approved boiler and filter kit (Certificate numbers: 1704053 & 1709098)
- 2.4 litre capacity, holding enough water for 7 cups of tea or coffee at a time
- 5-6 minute re-boil time
- Brushed stainless steel surround and smoked glass top
- Float sensor detects water level in the tank to avoid damage to the unit
- Requires standard 220-240V 13 amp socket - no electrian required for installation
- 2 year guarantee on the boiler unit
- Height - 273mm
- Depth - 190mm
- Width - 190mm
Please note: When you receive your Vellamo Kaffe instant hot water tank, please visit the website noted on top of the boiler tank within 14 days of purchase to register it
|Global Trade Item Number||5056585240510|
|Type||Mono Kitchen Mixers, Boiling Water Taps|
|Brand Range||Vellamo Kaffe|
|GuaranteeMore information||2 Years|
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information||Ceramic Disc|
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Mounting Type||Deck Mounted|
|Handle Type||Lever, Single Control|
|Spout Type||Swivel Spout|
|Minimum Tap Hole SizeMore information||35mm|
This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.
|Minimum Water PressureMore information||1.5|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.