-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
From £344.99
Recommended extras
We've hand-picked these items because they are a great choice alongside the Rangemaster Aquatrend Single Lever Kitchen Mixer Tap with Pull Out Spout
The Aquatrend Single Lever kitchen mixer from Rangemaster is a beautiful and elegant kitchen assistant, with a simple single lever design and practical pull out spout.
Crafted from top-quality brass and plated with a thick layer of chrome, Rangemaster's Aquatrend Single Lever kitchen mixer is the perfect fixture for bringing your kitchen in to the 21st century. The pull out spout offers washing flexibility in spades, allowing you to reach all those difficult spots, and it fitted with an aerator that provides a smooth and champagne-like water flow.
The Aquatrend Single Lever kitchen mixer is backed by a 5 year guarantee from Rangemaster.
Other Features:
Dimensions:
Crafted from top-quality brass and plated with a thick layer of chrome, Rangemaster's Aquatrend Single Lever kitchen mixer is the perfect fixture for bringing your kitchen in to the 21st century. The pull out spout offers washing flexibility in spades, allowing you to reach all those difficult spots, and it fitted with an aerator that provides a smooth and champagne-like water flow.
The Aquatrend Single Lever kitchen mixer is backed by a 5 year guarantee from Rangemaster.
Other Features:
- Available in a polished chrome or brushed nickel finish
- Deck mounted
- Minimum 1.5 bar water pressure
- Maximum pressure 5.5 bar
- Pivoting spout ideal for 1.5 or double bowl sinks
- High-arched spout for easy filling & washing of tall pots
- Single side lever for easy operation
- 5 year guarantee from Rangemaster
Dimensions:
- Overall height - 390mm
- Spout exit height - 205mm
- Projection - 220mm
- Recommended tap hole size - Ø35mm
- Maximum worktop thickness - 70mm
| Product Code | TRE1SLPOCM/-pv |
|---|---|
| Type | Mono Kitchen Mixers, Pull Out Kitchen Taps |
| Brand | Rangemaster |
| Brand Range | Rangemaster Aquatrend |
| GuaranteeMore information | 5 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| AeratorMore information | Yes |
|---|---|
| Cartridge TypeMore information | Ceramic Disc |
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Shape | Round |
| Handle Type | Lever, Single Control |
| Spout Type | Pull Out Spout, Swan Neck Spout, Swivel Spout |
| Tap Holes | Mono |
| Style | Modern |
| Finish | Select an option first |
| Texture | Select an option first |
| Minimum Tap Hole Size (mm)More information | 35 |
|---|---|
| Height (mm) | 390 |
| Projection (mm) | 220 |
This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.
| Flow Rate at 3 Bar (l/min) | 10.47 |
|---|---|
| Minimum Water PressureMore information | 1.5 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
Advice guides
-
The Different Types of Pull Out Kitchen Taps
The choice of pull out kitchen taps on the market can appear overwhelming, especially if you’re not entirely sure what you’re looking for. In this guide we’ll run through the different types of pull out kitchen taps. We’ll tell you the difference between spring-loaded pull out taps and weighted pull out taps, and whether you need a pull out tap with multiple spray functions or not. -
Why a Pull Out Spray Kitchen Tap Is the Ultimate Accessory
There are many unsurpassable benefits to having a pull out kitchen tap with a spray hose, so discover the reasons why every kitchen should have one.
