Skip to navigation Skip to content

Clearwater Auriga Single Lever Mono Kitchen Tap With Pull Out Spray - Polished Chrome

Rated 4.50/5 from 14 customer reviews

RRP £230 save 18%


Loading delivery estimate...

Pay 3 interest-free instalments of £62.66 with Klarna Learn more about Klarna
Pay 4 interest-free instalments of £47.00 with Clearpay Learn more about Clearpay

What's great about it?

  • Modern kitchen mixer with pull-out spout & single lever for effortless one-hand operation
  • Hard-wearing brassware with corrosion-resistant polished chrome plating
  • Pull-out spray with dual spray mode: cascade & needle jet
  • 360° rotation spout for ease-of-use and extra accessibility
  • Suitable for high water pressure systems

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Clearwater Auriga Single Lever Mono Kitchen Tap With Pull Out Spray - Polished Chrome

How many times have you wished for a pull out kitchen tap in your home, only to be put off by the gargantuan pull out taps that look more at home in a commercial kitchen? Some of these taps are more than half a metre tall, dwarfing all but the biggest kitchen sinks and making using them extremely tricky, especially for children. In recent years, however, there has been a steady stream of pull out kitchen taps that look just like, well, a kitchen tap. To the untrained eye, the Clearwater Auriga looks just like any 'standard' kitchen tap, however, on closer inspection it becomes clear that it is so much more.

The Clearwater Auriga has a chrome-plated plastic pull out spout and 700mm pull out hose with two functions, "cascade" and "needle spray." The cascade function is perfect for cleaning your sink or worktop area from any debris, whereas the needle jet function offers a rain-like flow which is perfect for rinsing fruit and veg. The length of the pull out hose and the 360° swivel spout means that it's also entirely possible for you to water plants that you may have on a kitchen windowsill or fill up a bucket of water without having to lift the bucket up to the sink. The possibilities and practicalities of a pull out tap really are endless.

To allow it to blend in with any kitchen décor, the Auriga is finished in stunning polished chrome which is both long-lasting if well looked after, and easy to clean. It also has a large single lever control. This is not only in keeping with the Auriga's simple, elegant styling, but it also serves a practical purpose as well, as having just a single lever makes it easy to control both the flow and the temperature of the water with just one hand.

As with all Clearwater taps, the Auriga has ceramic disc cartridges to control the flow of water. These are tested for 200,000 cycles before being given the all clear to be used in Clearwater taps, giving you peace of mind that this is not just a tap that has built to be stylish, but one that has been built to last as well.

  • High quality chrome finish
  • Pull out spray with "cascade" and "needle jet" function
  • 360° swivel spout
  • Minimum 2 bar water pressure required
  • Ceramic disc technology

  • Overall height - 295mm
  • Spout exit height - 259mm
  • Projection - 233mm
  • Minimum tap hole size - 35mm
  • Pull out hose length - 700mm

Product Overview
Product Code CW00214CP
Type Mono Kitchen Mixers, Pull Out Kitchen Taps
Brand Clearwater
Brand Range Clearwater Auriga
GuaranteeMore information 5 Years


Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

AeratorMore information Yes
Cartridge TypeMore information Ceramic Disc
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome. 
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Mounting Type Deck Mounted
Finish Polished Chrome
Shape Round
Handle Type Lever, Single Control
Spout Type 360 Degree Swivel Spout, L-Shaped Spout, Pull Out Spout
Texture Polished
Tap Holes Mono
Style Modern
Minimum Tap Hole Size (mm)More information 35
Hose Length (mm) 700
Height (mm) 295
Projection (mm) 233

This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.

Flow Rate
Minimum Water PressureMore information 2

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Rated 4.50/5 from 14 customer reviews


Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.