We've hand-picked these items because they are a great choice alongside the Burlington Anglesey 3 Inch Basin Pillar Taps
You'd be forgiven for assuming that with old-style taps comes old-style technology. Fortunately, Burlington are at the top of their game when it comes to modernising their tap tech, which is why these pillar taps are supplied with a Neopearl flow straightener and Neopearl aerator to ensure a consistent stream of water every time. Suitable for both low and high pressure water systems, the taps also use quarter-turn ceramic disc cartridges for extra durability and ease of use.
- 3" basin pillar taps
- Suitable for low and high pressure systems
- Supplied with Neopearl flow straightener and aerator
- Crafted from solid brass and white ceramic
- Polished chrome finish
- Quarter turn, ceramic disc technology
- 10 year guarantee
- Width - 64mm
- Height - 139mm
- Depth - 87mm
|Type||2 Hole Basin Mixers, Basin Pillar Taps|
|Brand Range||Burlington Anglesey|
|GuaranteeMore information||10 Years|
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information||Ceramic Disc|
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Mounting Type||Deck Mounted|
|Handle Type||Crosshead, Dual Control|
|Spout Type||Straight Spout, Fixed Spout|
|Tap Holes||2 Holes|
|Minimum Water PressureMore information||0.2|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
New bathroom basin taps are a great way of enhancing the overall look of your bathroom, en-suite or cloakroom bathroom without the need to spend money on a complete refurbishment. Choosing, however, is not quite as straightforward as it sounds, so we've put together a guide to explain the different types of basin taps and what you should be on the look out for.