Skip to navigation Skip to content

Vellamo Revolve Brushed Stainless Steel Mono Kitchen Sink Mixer Tap

Rated 4.31/5 from 105 customer reviews

RRP £94 save 36%

£59.99

Loading delivery estimate...

Klarna
Pay 3 interest-free instalments of £19.99 with Klarna Learn more about Klarna
Clearpay
Pay 4 interest-free instalments of £15.00 with Clearpay Learn more about Clearpay

What's great about it?

  • Classic swan neck kitchen mixer with a contemporary twist
  • Constructed from durable stainless steel with a light brushed effect
  • Single lever design for effortless one-hand control
  • Quarter turn ceramic disc valves for improved performance & longer life span
  • Suitable for all water systems with a minimum water pressure requirement of 0.5 bar

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Vellamo Revolve Brushed Stainless Steel Mono Kitchen Sink Mixer Tap

We love stainless steel kitchen taps here at Tap Warehouse, and the Vellamo Revolve is no different. Unlike most kitchen taps which are made from brass and then chrome plated, the Revolve stainless steel tap is made entirely from stainless steel. Stainless steel is regarded as the most hygienic metal. There are no pores on the surface to find and it's easily cleaned; it's for this reason that most taps you'll find in hospitals and restaurant kitchens are made from it.

Stainless steel taps are also more robust than chrome taps. We don't recommend that you go round testing it out, but it's go to know that it can handle the odd knock every now and then. Like most modern taps, the Revolve uses ceramic disc cartridges to control the flow of water. These cartridges offer greater longevity than rubber washers, and they also provide a better seal, so no more drips. The large single lever control is easy to use and only requires a quarter turn to turn it on and off.

Features:
  • Made from high quality stainless steel
  • Beautiful brushed finish looks the part
  • Easy to use quarter turn single lever handle
  • Ceramic disc technology - no more drips
  • WRAS Approved mono kitchen mixer - read more about the WRAS scheme and why it's important in our handy blog
  • Swivel spout
  • Includes tap fixing kit
  • Suitable for low pressure systems - minimum 0.5 bar required
  • Lifetime manufacturer's guarantee

Dimensions:
  • Overall height - 368mm
  • Spout exit height - 254mm
  • Projection - 200mm
  • Minimum tap hole size - 35mm
  • Maximum worktop thickness - 40mm

Product Overview
Product Code KT42
Global Trade Item Number 5056585209074
Type Mono Kitchen Mixers
Brand Vellamo
Brand Range Vellamo Revolve
GuaranteeMore information Lifetime

Guarantee

All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 
Features
AeratorMore information Yes
Cartridge TypeMore information Ceramic Disc
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome. 
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Style
Mounting Type Deck Mounted
Finish Brushed Stainless Steel
Shape Round
Handle Type Lever, Single Control
Spout Type Swan Neck Spout, Swivel Spout
Texture Brushed
Tap Holes Mono
Style Modern
Dimensions
Minimum Tap Hole Size (mm)More information 35
Height (mm) 368
Projection (mm) 200

This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.

Flow Rate
Flow Rate at 0.5 Bar (l/min) 5.4
Flow Rate at 1 Bar (l/min) 7.2
Flow Rate at 2 Bar (l/min) 10.8
Flow Rate at 3 Bar (l/min) 12.4
Minimum Water PressureMore information 0.5

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

(105)
Rated 4.31/5 from 105 customer reviews

£59.99

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.