-
Click the image to zoom
-
Click the image to zoom
£324.99
Recommended extras
We've hand-picked these items because they are a great choice alongside the Rangemaster Cruciform Spa Filter Kitchen Sink Mixer Tap - Brushed Nickel
No matter how you want to style your kitchen, the Rangemaster Cruciform Spa Filter kitchen sink mixer tap in brushed nickel somehow manages to blend in without completely being overshadowed. How can you overshadow something that's both majestic and graceful at the same time, with its neck curving slowly towards the sink and those levers showing quiet sleekness? The brushed nickel finish gives it that unique look that gives it more personality, and topping that off is the overall design that mixes the best qualities of both traditional and modern design. Truly a masterpiece, it's the perfect centrepiece for any kitchen sink.
The Cruciform Spa filter kitchen tap delivers clean, crystal clear, still water on demand with the push of a handle. Featuring a high quality carbon filter designed to purify up to 2,500 litres of water, which lasts 6 months on average in standard domestic households, the carbon filter removes any impurities which can impair the taste of still water, providing a pure, refreshing taste every time.
Features:
Dimensions:
The Cruciform Spa filter kitchen tap delivers clean, crystal clear, still water on demand with the push of a handle. Featuring a high quality carbon filter designed to purify up to 2,500 litres of water, which lasts 6 months on average in standard domestic households, the carbon filter removes any impurities which can impair the taste of still water, providing a pure, refreshing taste every time.
Features:
- Cold, filtered water straight from your kitchen tap
- Sleek brushed nickel finish
- Easy to use twin lever design
- Quarter turn ceramic disc technology - long lasting and no drips
- Suitable for low pressure systems
- Minimum water pressure of 0.2 bar required
- Filtered water controlled by pulling back cold lever, 80 - 85mm clearance behind tap required
- 5 year manufacturer's guarantee
Dimensions:
- Overall height - 392mm
- Spout exit height - 265mm
- Projection - 216mm
- Recommended tap hole size - Ø 35mm
- Maximum worktop thickness - 65mm
| Product Code | TSA5BF/ |
|---|---|
| Type | Filtered Water Taps, Mono Kitchen Mixers |
| Brand | Rangemaster |
| Brand Range | Rangemaster Cruciform |
| GuaranteeMore information | 5 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| AeratorMore information | Yes |
|---|---|
| Cartridge TypeMore information | Ceramic Disc |
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Finish | Brushed Nickel |
| Shape | Round |
| Handle Type | Dual Control, Lever |
| Spout Type | Swan Neck Spout, Swivel Spout |
| Texture | Brushed |
| Tap Holes | Mono |
| Style | Modern |
| Minimum Tap Hole Size (mm)More information | 35 |
|---|---|
| Height (mm) | 392 |
| Projection (mm) | 216 |
This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.
| Flow Rate at 3 Bar (l/min) | 26.16 |
|---|---|
| Minimum Water PressureMore information | 0.2 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
Advice guides
-
Filtered Water Taps Buying Guide
Perfectly filtered water at the turn of a handle? Yes please! This guide outlines the benefits of filtered water taps, explores how they work and outlines some of our favourite designs.
