Skip to navigation Skip to content

Perrin & Rowe Parthian Mini Instant Hot Water Tap

No reviews yet - Write one

RRP £1,178 save 15%

From £999.99

Please select an option

Loading delivery estimate...

Pay 3 interest-free instalments of £333.33 with Klarna Learn more about Klarna
Pay 4 interest-free instalments of £250.00 with Clearpay Learn more about Clearpay

What's great about it?

  • Mini instant hot water tap provides up to 99°C filtered hot water
  • Hard-wearing brassware with 4 finishes available: Chrome, Nickel, Gold & Pewter
  • Compact size perfect for limited spaces
  • Child-proof mechanism to release the boiling water function for added safety
  • Suitable for high water pressure systems

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Perrin & Rowe Parthian Mini Instant Hot Water Tap

Installing an instant hot water tap in your kitchen is not only a great timesaver, but it can also save you money as well. The average kettle costs around 2.5p to boil, and most of the time this is just for one cup of tea or coffee. The Perrin & Rowe Parthian mini instant hot water tap costs around hal of this, and because you are only boiling the exact amount of water that you are going to use, it makes it much more energy efficient than a kettle.

The Parthian mini kettle tap is available in a choice of finishes; chrome, nickel, pewter and gold, so there is bound to be a finish that would match the décor in your kitchen. The temperature of the water coming out of the Parthian can be pre-set anywhere from 75°C to 99°C, and this is done via a touch screen on the boiler unit which is housed under the sink.

The Perrin & Rowe Parthian comes complete with the latest filtration technology that removes the impurities from your water supply, and leaves your tea or coffee tasting pure and fresh. The filter also vastly reduces the amount of limescale that passes through the tap, therefore increasing the lifespan of the tap itself.

Quality Promise:
  • Manufactured in the UK from the highest quality raw materials
  • Employing the latest available technology and made from low lead brass
  • Plated to a thickness that exceeds industry standards
  • Assembled by hand and individually water tested to ensure peace of mind
  • Made with ceramic disk valves supplied by the world’s leading manufacturer, tested to 5000,000 life cycles, equating to at least 25 years of domestic use.

Made in Britain

  • Available in chrome, nickel, pewter or gold finish
  • Pre-set temperature ranging from 75°C to 99°C
  • Filtration technology
  • Unique anti-scald locking mechanism
  • Minimum 1.5 bar water pressure
  • 1 year guarantee on finish
  • 5 year guarantee on parts

  • Overall height - 255mm
  • Spout exit height - 165mm
  • Projection - 140mm

Product Overview
Product Code 1307-pv
Type Boiling Water Taps
Brand Perrin & Rowe
Brand Range Perrin & Rowe Parthian
GuaranteeMore information 1 Year


Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Cartridge TypeMore information Ceramic Disc
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Mounting Type Deck Mounted
Shape Round
Handle Type Lever, Single Control
Spout Type Swan Neck Spout, Swivel Spout
Tap Holes Mono
Style Traditional
Height (mm) 255
Projection (mm) 140
Flow Rate
Minimum Water PressureMore information 1.5

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

No reviews yet - Write one

From £999.99

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.