Skip to navigation Skip to content

Harbour Status Matt Black Bath Mixer Tap

Rated 3.80/5 from 5 customer reviews

RRP £175 save 26%


Loading delivery estimate...

Pay 3 interest-free instalments of £43.33 with Klarna Learn more about Klarna
Pay 4 interest-free instalments of £32.50 with Clearpay Learn more about Clearpay

What's great about it?

  • Deck-mounted bath filler with modern design style to suit contemporary bathrooms
  • Manufactured from reliable solid brass and finished in Matt Black for a clean, bold look
  • H: 135mm, Projection: 135.5mm
  • Fitted with ceramic disc cartridge valves for easy turning and leak-free longevity
  • Minimalist design sense makes for quicker cleaning both of and around the tap

Read full product description


Recommended extras

We've hand-picked these items because they are a great choice alongside the Harbour Status Matt Black Bath Mixer Tap

Black & white; they go together like knife & fork or Lennon & McCartney, and whether it's fashion, art, or interior design, black and white never look out of place. The Harbour Status range of matt black bathroom taps and showers will look superb in a black bathroom, but they'll look equally stylish when placed in contrast with white basins, baths and walls. And we can almost guarantee that these Harbour Status matt black taps will never go out of style.

Not only will they not go out of style, they're also extremely unlikely to cause you any problems. The Status two hole bath filler comes with ceramic disc cartridges which ensures that it is easy to use and that the tap will not drip after it's turned off. What's more, the Status comes with a 10 year guarantee.

  • Stylish matt black finish
  • Made from solid brass
  • Minimum 0.2 bar water pressure required
  • Ceramic disc technology - long-lasting and no drips
  • 10 year guarantee

  • Height - 135mm
  • Projection - 110mm

Product Overview
Product Code HBSTAT25
Type Bath Fillers, Bridge Bath Taps
Brand Harbour
Brand Range Harbour Status
GuaranteeMore information 10 Years


Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Cartridge TypeMore information Ceramic Disc
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Mounting Type Deck Mounted
Finish Matt Black
Shape Round, Square
Handle Type Dual Control, Round
Spout Type Straight Spout
Texture Matt
Tap Holes 2 Holes
Style Modern
Width (mm) 216
Height (mm) 135
Depth (mm) 158
Projection (mm) 110
Flow Rate
Flow Rate at 0.1 Bar (l/min) 11.9
Flow Rate at 0.2 Bar (l/min) 16
Flow Rate at 0.5 Bar (l/min) 24.6
Flow Rate at 1 Bar (l/min) 32.8
Flow Rate at 1.5 Bar (l/min) 42
Flow Rate at 3 Bar (l/min) 53.9
Minimum Water PressureMore information 0.2

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Rated 3.80/5 from 5 customer reviews


Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.