We've hand-picked these items because they are a great choice alongside the Crosswater Kai Exposed Thermostatic Bath Shower Mixer with Integrated Spout
All water-carrying elements are installed on front of the wall, so they can be simply maintained or upgraded at any time without the need to get inside walls.The thermostatic control has an automatic built-in safety stop at 40°C with manual override to ensure a safer showering experience at home. The fail-safe thermostatic control maintains the selected temperature to within 1.5°C degrees either side, giving you reign over precisely controlled water temperature levels.
Pair it with the Crosswater Shower Kit of your choice for the perfect showering experience.
Upgrading your shower tap to a Kai shower mixer tap is a cost-effective way of making your bathroom have a cosy and sophisticated overall look. And with the Crosswater 15-year guarantee backing it up, you’ll be assured that it’s going to last long.
- Easy installation
- Failproof temperature control
- Diverter to control 2 outlets
- Integrated shower outlet and bath filler spout
- Separated flow and temperature handles
- Ceramic disc anti-drip technology
- Wall mounted
- Includes wall unions for installation
- 1 bar minimum water pressure
- 15 Years guarantee
|Global Trade Item Number||5055833608249|
|Type||Wall Mounted Bath Shower Mixers|
|Brand Range||Crosswater Kai Lever|
|GuaranteeMore information||15 Years|
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Number of Outlets||2 Outlets|
|Cartridge TypeMore information||Ceramic Disc|
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Mounting Type||Wall Mounted|
|Handle Type||Round, Dual Control|
|Spout Type||Straight Spout|
|Tap Holes||2 Holes|
|Minimum Water PressureMore information||1|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.