Skip to navigation Skip to content

Crosswater Wisp Wall Mounted Basin Valve & Spout Set

No reviews yet - Write one
Please select an option

Loading delivery estimate...

Klarna
Pay 3 interest-free instalments of £84.99 with Klarna Learn more about Klarna
Clearpay
Pay 4 interest-free instalments of £63.75 with Clearpay Learn more about Clearpay

What's great about it?

  • Wall-mounted 2 hole basin mixer with straight spout & single lever
  • Hard-wearing brassware with two colour options
  • Wall-mounted installation with concealed fixings for a clutter-free countertop
  • Ideal for use with basins with no pre-punched tap holes
  • Suitable for high water pressure systems

Read full product description

Elegance doesn't always have to come in startlingly huge packages. There are times when having even small pieces work! This is true for the 2-hole Wisp wall mounted basin from Crosswater. These wall-mounted pieces are compact enough to occupy just a bit of vertical space and, above all, to give your bath a unified look. The softened edges of this two-piece basin set make it a great addition to any kind of bathroom. These pieces have round back plates that are easy to install and maintain.

Features:
  • WRAS Approved Certificate
  • Single lever for easy control of water flow and temperature
  • 1 bar minimum water pressure
  • Ceramic disc technology
  • Wall mount for a space saving solution
  • Ideal for pairing with countertop basins
  • Includes installation kit with mounting plate, mixer and flexible hoses
  • Recessed valve
  • 15 Years guarantee

Dimensions:
  • Height: 132mm
  • Projection: 186mm

Downloads
Cleaning Instructions
Product Overview
Product Code WP120WNC
Type 2 Hole Basin Mixers, Wall Mounted Basin Taps
Brand Crosswater
Brand Range Crosswater Wisp
GuaranteeMore information 15 Years

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 
Features
Material Brass
Cartridge TypeMore information Ceramic Disc
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Style
Mounting Type Wall Mounted
Shape Round
Handle Type Lever, Single Control
Spout Type Fixed Spout, Straight Spout
Tap Holes 2 Holes
Style Modern
Finish Polished Chrome
Texture Polished
Dimensions
Width (mm) 130
Height (mm) 94
Depth (mm) 186
Projection (mm) 186
Flow Rate
Flow Rate at 1 Bar (l/min) 6.3
Flow Rate at 1.5 Bar (l/min) 6.3
Flow Rate at 2 Bar (l/min) 11.6
Flow Rate at 3 Bar (l/min) 14.5
Flow Rate at 4 Bar (l/min) 14.5
Minimum Water PressureMore information 1

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

(0)
No reviews yet - Write one

£254.99

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.