-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
Features:Crosswater MPRO combines function with design in an industrial blend of modern and vintage Available in three finishes: Chrome, Carbon Black, and Unlacquered Brushed Brass Wall mounted Ceramic Disc Technology Minimum water pressure required: 1 bar Wall taps only, please see recommended extras for spout if required 15 year manufacturer's guarantee (subject to online registration - please click here)
Dimensions:Projection: 169mm
Important:Carbon Black is a fully matt finish and is best paired with other products within the Industrial range to maintain the same finish. Unlacquered Brushed Brass is designed and manufactured to oxidise over time, resulting in a change of colour with a unique industrial look, giving even more personality to your bathroom. This is a great match to the products from the same Industrial range.
Dimensions:
Important:
Cleaning Instructions |
---|
Product Code | xwater-mpro-ind-wall-stop-taps |
---|---|
Type | On/Off Valves |
Brand | Crosswater |
Brand Range | Crosswater MPRO |
GuaranteeMore information | 15 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
Material | Brass |
---|---|
Number of Outlets | 1 Outlet |
Cartridge TypeMore information | Ceramic Disc |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Mounting Type | Wall Mounted |
---|---|
Shape | Curved |
Handle Type | Lever, Round |
Tap Holes | 2 Holes |
Style | Modern |
Finish | Select an option first |
Texture | Select an option first |
Width (mm) | 60 |
---|---|
Height (mm) | 60 |
Projection (mm) | 63 |
Minimum Water PressureMore information | 1 |
---|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.