We've hand-picked these items because they are a great choice alongside the Crosswater Belgravia Lever Floor Standing Bath Filler
The sumptuous contours of the mixer, bath spout and legs are crafted from solid brass and lacquered with anti-corrosion chrome. This will guarantee high-performance from your bath filler for many years to come.
The unique Flühs Valve Technology allows for a subtle brass inline for flow control, while the ceramic disc cartridge delivers a smooth operation. Perfect for adding a distinctively touch of elegance, this piece proves that, though the bathroom may be the smallest room in the house, it can still be big on style.
Make your bathroom even more luxurious with Crosswater Belgravia Collection for bathroom accessories.
- Traditional Victorian design
- Ceramic varnished twin levers
- Independent hot and cold flow controls
- 1 bar minimum water pressure
- Flühs® anti-drip cartridge
- Manual temperature setting
- Free standing installation
- High-resistant brass construction
- Anti-rust polished chrome overlay
- Wide-mouth bath spout
- Spout Projection: 165mm
- Leg adjustment distances: 150mm min - 180mm max
|Global Trade Item Number
|Bath Fillers, Freestanding Bath Taps
|Crosswater Belgravia Lever
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Number of Outlets
|Cartridge TypeMore information
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Lever, Dual Control
|Minimum Water PressureMore information
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.