Skip to navigation Skip to content

Clearwater Morpho Mono Kitchen Mixer with 'Flex & Stay' Spout - Brushed Nickel & Choice of Hose Colour

Rated 5.00/5 from 8 customer reviews
Please select an option

Loading delivery estimate...

Klarna
Pay 3 interest-free instalments of £73.33 with Klarna Learn more about Klarna
Clearpay
Pay 4 interest-free instalments of £55.00 with Clearpay Learn more about Clearpay

What's great about it?

  • Unique 'flex & stay' design allows you to manoeuvre the tap wherever you want
  • Brushed nickel finish with a choice of 4 hose colours - black, white, grey and red
  • SLC Neoperl aerator provides a splash-free flow of water
  • Easy to use single lever design with ceramic disc technology
  • Minimum 1 bar water pressure required

Read full product description

Say hello to true kitchen tap innovation with the Clearwater Morpho mono kitchen mixer. Before we get into the nitty-gritty, let's not forget how truly beautiful this contemporary kitchen tap is thanks to its sleek brushed nickel finish, and customisable hose. Choose one of four colours to add your personal touch to the Morpho; red, white, black, or grey.

Stunning modern design aside, the Morpho is far more than just a kitchen tap. This gorgeous mixer boasts a "flex & stay' spout making it possible for you to position the spout however you please, following which it will remain fixed there until you move it again. This is great for targeting hard-to-clean pans or simply directing the water flow in your preferred direction. There's more! The Morpho also contains an SLC neoperl aerator protecting you from any unwanted splashback, whilst simultaneously saving you money on your water bill. If all that hasn't convinced you, the Morpho also comes along with a rather reassuring 5 year manufacturer's guarantee too.

Features:
  • Stunning brushed nickel finish
  • Choice of hose colour - black, grey, red or white
  • 360° swivel flex & stay spout
  • Easy to use single lever design - control the water flow and temperature with one hand
  • Ceramic disc technology prevents any drips once the tap is turned off
  • SLC neoperl aerator
  • Minimum water pressure of 1 bar required
  • 5 year manufacturer's guarantee

Dimensions:
  • Overall height - 438mm
  • Spout exit height - 258mm
  • Projection - 220mm
  • Minimum tap hole size - 35mm

Please note: When purchasing the Grey, Red & White hose options you will receive a tap with a Black hose as a standard and the chosen coloured hose is supplied in a separate box for an easy swap at your convenience.

Downloads
Cleaning Instructions
Product Overview
Product Code Clearwater-Morpho-Nickel-pv
Type Mono Kitchen Mixers, Pull Out Kitchen Taps
Brand Clearwater
Brand Range Clearwater Morpho
GuaranteeMore information 5 Years

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 
Features
AeratorMore information Yes
Cartridge TypeMore information Ceramic Disc
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome. 
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Style
Mounting Type Deck Mounted
Shape Round
Handle Type Lever, Single Control
Spout Type 360 Degree Swivel Spout, Flexible Spout
Tap Holes Mono
Style Modern
Finish Select an option first
Texture Select an option first
Dimensions
Minimum Tap Hole Size (mm)More information 35
Height (mm) 438
Projection (mm) 220

This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.

Flow Rate
Minimum Water PressureMore information 1

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

(8)
Rated 5.00/5 from 8 customer reviews

From £219.99

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.