We've hand-picked these items because they are a great choice alongside the Clearwater Meridian Single Lever Mono Kitchen Mixer with Detachable Spout
The Clearwater Meridian mono kitchen tap has been designed with this multi-function philosophy in mind. On the face of it, it can be used just like any other kitchen tap. It has a 360° swivel spout, an easy to use single lever control and a spout aerator which provides a non-splash, frothy flow. But in the blink of an eye the spout can be detached to give you an extended reach as and when you need it. This is perfect for cleaning those harder to reach areas of your kitchen sink. A small button on the front of the nozzle allows you to alternate between "cascade" and "needle jet" flow, giving you even more control over how you use your tap.
As with all modern Clearwater taps, the Meridian uses ceramic disc cartridges to control the flow of water. The cartridges used in Clearwater taps have been tested for over 200,000 cycles to ensure that there will never be any drips from your tap. With four different colour/finish combinations available, it's possible to coordinate your Clearwater Meridian tap to your sink and worktop - something that's very tricky with a plain old chrome-plated tap. As a testament to the design and build quality of the Meridian, it also comes with a 5 year guarantee.
With twin lever operation, you have separate hot and cold controls, ensuring precise temperature control whilst making sure cold drinking water is never mixed with hot. This style of tap is often the best solution for homes which have high pressure systems.
- Available in Chrome & Black; Chrome & White; Brushed Nickel & Black, or Brushed Nickel & White
- Perfect for colour coordinating with appliances
- Includes anti-splash flow aerator
- Minimum 1 bar water pressure
- Quarter turn ceramic disc valves
- Side single lever for easy operation
- Overall height - 530mm
- Spout exit height - 229mm
- Projection - 230mm
- Mounting hole diameter - 35mm
|Mono Kitchen Mixers, Pull Out Kitchen Taps
|Global Trade Item Number
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Lever, Single Control
|Swan Neck Spout, 360 Degree Swivel Spout, Pull Out Spout
|Brushed Nickel, Black
|Minimum Tap Hole Size (mm)More information
This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.
|Minimum Water PressureMore information
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
Need more help?
The choice of pull out kitchen taps on the market can appear overwhelming, especially if you’re not entirely sure what you’re looking for. In this guide we’ll run through the different types of pull out kitchen taps. We’ll tell you the difference between spring-loaded pull out taps and weighted pull out taps, and whether you need a pull out tap with multiple spray functions or not.
There are many unsurpassable benefits to having a pull out kitchen tap with a spray hose, so discover the reasons why every kitchen should have one.