Skip to navigation Skip to content

Burlington Anglesey Regent Deck Mounted Bath Filler Tap with Straight Valves

No reviews yet - Write one

RRP £558 save 27%


Loading delivery estimate...

Pay 3 interest-free instalments of £136.66 with Klarna Learn more about Klarna
Pay 4 interest-free instalments of £102.50 with Clearpay Learn more about Clearpay

What's great about it?

  • Deck-mounted bath filler bridge tap with traditionally styled temperature handle indices
  • Made from reliable solid brass and finished in Polished Chrome adding sleek appeal
  • Quarter-turn ceramic disc valve cartridges ensure easy operation and leak-free longevity
  • Fitted with a flow straightener and aerator to avoid splashes and maintain an even stream

Read full product description


Give your bathroom visitors the royal treatment they deserve with the Burlington Anglesey Regent Bath Filler. Standing at an extended 3cm height to the standard sized bath filler, this tap just oozes period charm and luxury, and makes for a wonderful companion to a freestanding roll-top bathtub. The polished chrome finish and solid brass body only adds to the appeal of this beautiful traditional bath filler, and the four spoke handles feature white ceramic indices with Burlington's signature branding to complete the look. Elongated curves reach down to the wide nose spout which allows water to cascade from it with all of the elegance of a jungle waterfall. Ceramic disc technology allows you to effortless control the water flow too with just a simple quarter-turn of the handles.

  • Deck mounted, bath filler tap
  • Straight valves
  • Regent 3cm extra height
  • Ceramic disc technology
  • Supplied with Neopearl flow straightener and aerator
  • Suitable for low and high water pressure
  • Crafted from solid brass
  • 10 year guarantee

  • Height - 214mm
  • Width - 206mm
  • Depth - 165mm

Product Overview
Product Code ANR23-QT
Type Bath Fillers, Bridge Bath Taps
Brand Burlington
Brand Range Burlington Anglesey
GuaranteeMore information 10 Years


Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Material Brass
Number of Outlets 1 Outlet
Temperature Control Manual
Cartridge TypeMore information Ceramic Disc
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Mounting Type Deck Mounted
Finish Chrome
Shape Curved
Handle Type Crosshead, Dual Control
Spout Type Curved Spout
Texture Polished
Tap Holes 2 Holes
Style Traditional
Width (mm) 206
Height (mm) 214
Depth (mm) 157
Projection (mm) 130
Flow Rate
Minimum Water PressureMore information 0.2

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

No reviews yet - Write one


Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.