We've hand-picked these items because they are a great choice alongside the Crosswater MPRO Industrial 2 Hole Wall Mounted Basin Mixer Tap - Unlacquered Brushed Brass
That's right, you've found it: the ultimate piece of industrial luxury for elevating your bathroom design just that little bit more! The eye-catching Crosswater MPRO Industrial 2 hole wall mounted basin mixer tap boasts a stylish textured design with knurled detailing, alongside a striking unlacquered brushed brass finish that's designed to oxidise over time for an extra flair of vintage industrial style.
Ceramic disc technology is in place to prolong the life of your tap and prevent any leaks or dripping, whilst the minimalist single lever design promises precise control over the water flow and temperature. Wall mounted for a clutter-free basin look, this mesmerising basin tap beautifully complements the full MPRO Industrial brushed brass collection, and even offers a 15 year manufacturer's guarantee for reassurance.
- Crosswater MPRO combines function with design in an industrial blend of modern and vintage
- Unique Unlacqured Brushed Brass finish
- Unlacqured Brushed Brass is manufactured and designed to oxidise, this will result in a change of colour with a unique industrial look, giving even more personality to your bathroom
- Lever control
- Wall mounted
- 2 hole mixer tap
- Minimum water pressure required: 1 bar
- Waste not included please see recommended extras
- 15 year manufacturers guarantee
- Projection: 200-211mm
Important: This is an unlacquered/living finish that will change and patina over time. We advise that you do not pair with any other ranges of Brushed Brass (for example Crosswater MPRO Brushed Brass, VOS or Butler & Rose Beatrice) as the finishes will not match. Instead, pair with the Industrial range.
|Global Trade Item Number||5055833691821|
|Type||Wall Mounted Basin Taps, 2 Hole Basin Mixers|
|Brand Range||Crosswater MPRO|
|GuaranteeMore information||15 Years|
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information||Ceramic Disc|
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Mounting Type||Wall Mounted|
|Finish||Unlacquered Brushed Brass|
|Handle Type||Round, Lever|
|Spout Type||L-Shaped Spout|
|Tap Holes||2 Holes|
|Minimum Water PressureMore information||1|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
New bathroom basin taps are a great way of enhancing the overall look of your bathroom, en-suite or cloakroom bathroom without the need to spend money on a complete refurbishment. Choosing, however, is not quite as straightforward as it sounds, so we've put together a guide to explain the different types of basin taps and what you should be on the look out for.