-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
Features:
- Space saving design
- Overflow bath filler with easy clean clicker bath waste
- Matt black finish
- Constructed from Brass & Zinc alloy
- Minimum 0.5 bar water pressure required
| Cleaning Instructions |
|---|
| Product Code | VELW04 |
|---|---|
| Type | Clicker Bath Wastes, Overflow Bath Fillers |
| Brand | Vellamo |
| Brand Range | Vellamo Matt Black |
| AeratorMore information | No |
|---|---|
| Material | Brass, Zinc Alloy |
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
| Finish | Matt Black |
|---|---|
| Shape | Round |
| Spout Type | Overflow Spout |
| Texture | Matt |
| Style | Modern |
| Flow Rate at 0.5 Bar (l/min) | 10.5 |
|---|---|
| Flow Rate at 1 Bar (l/min) | 15.3 |
| Flow Rate at 2 Bar (l/min) | 21.7 |
| Flow Rate at 3 Bar (l/min) | 26.6 |
| Minimum Water PressureMore information | 0.5 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Related categories
We're here for you
Advice guides
-
Bath Taps: A Complete Guide to Help You Decide
At Tap Warehouse we stock an enormous range of bath taps for you to choose from. In fact, there are just so many that we can’t even decide which our favourites actually are… We’ve tried our hardest though, and narrowed it down to some of the very best taps for all budgets and styles for you to peruse below. -
Bathroom Taps: What You Need to Know
There is a huge variety of bathroom taps out there. This guide walks you through the questions that you should be asking yourself before choosing new taps for your bathroom.
