Butler & Rose Carlton Deck Mounted Bath Shower Mixer with Handset Kit
We've hand-picked these items because they are a great choice alongside the Butler & Rose Carlton Traditional Kitchen Bridge Mixer - Crosshead Handles
|Global Trade Item Number||5090219401007|
|Type||2 Hole Kitchen Taps, Kitchen Bridge Mixers|
|Brand||Butler & Rose|
|Brand Range||Butler & Rose Carlton|
|Mounting Type||Deck Mounted|
|Handle Type||Crosshead, Dual Control|
|Spout Type||Curved Spout, Swivel Spout|
|Minimum Water PressureMore information||0.5|
|Tap Holes||2 Holes|
|GuaranteeMore information||10 Years|
|Minimum Tap Hole SizeMore information||35mm|
|Cartridge TypeMore information||Ceramic Disc|
|Flow Rate at 0.2 Bar (l/min)||3.6|
|Flow Rate at 0.5 Bar (l/min)||5.8|
|Flow Rate at 1 Bar (l/min)||10|
|Flow Rate at 2 Bar (l/min)||14.8|
|Flow Rate at 3 Bar (l/min)||18.5|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.
Click the image to zoom
Click the image to zoom
Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.
We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.
If you are in a hurry, view similar products available for next day delivery.