-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
£59.99
Recommended Extras
We've hand-picked these items because they are a great choice alongside the Vellamo Venta Waterfall Mini Basin Mixer Tap & Waste
This mini mono basin mixer tap and waste in polished Chrome is a stylish choice for smaller basins, featuring a compact design and a contemporary waterfall spout that delivers a smooth, cascading flow. Operating efficiently with a minimum water pressure of 0.1 bar, it’s compatible with all plumbing systems, making it especially suitable for homes with low water pressure. Crafted from durable brass, this tap is built for lasting use, featuring ceramic disc technology to prevent leaks and drips, ensuring consistent, reliable performance. Complete with a ten-year manufacturer’s guarantee, this tap brings both elegance and dependability to any modern bathroom.
- Mini basin mixer tap in Chrome for a classic and contemporary feel
- Matching slotted basin waste included
- Waterfall design creates a smooth flow of water that adds a spa-like ambience to your bathroom
- Brass body and zinc alloy handle providing durability and antibacterial properties
- Single lever control allowing for easy adjustment of water temperature and flow with one hand
- Ceramic disc technology prevents any unwanted leaks or drips
- Minimum 0.1 bar water pressure
- Complies with BS6920 and BSEN200
- WRAS approved
- Includes flexi tails for quick and easy installation
- Complements the Vellamo Venta range
- 10 year manufacturer’s guarantee
| Cleaning Instructions |
|---|
| Product Code | VELVENT05 |
|---|---|
| Type | Cloakroom Basin Mixers, Mono Basin Mixers |
| Brand | Vellamo |
| Brand Range | Vellamo Venta |
| GuaranteeMore information | 10 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Waste Type | Click Clack Waste |
|---|---|
| AeratorMore information | Yes |
| Material | Brass, Zinc Alloy |
| Cartridge TypeMore information | Ceramic Disc |
| Popular Features | Waste Included |
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Finish | Chrome |
| Shape | Round |
| Handle Type | Lever, Single Control |
| Spout Type | Fixed Spout, Waterfall Spout |
| Texture | Polished |
| Tap Holes | Mono |
| Style | Modern |
| Width (mm) | 54 |
|---|---|
| Height (mm) | 127 |
| Depth (mm) | 118 |
| Projection (mm) | 91 |
| Flow Rate at 0.1 Bar (l/min) | 5.2 |
|---|---|
| Flow Rate at 0.2 Bar (l/min) | 6.4 |
| Flow Rate at 0.5 Bar (l/min) | 8.7 |
| Flow Rate at 1 Bar (l/min) | 11.8 |
| Flow Rate at 1.5 Bar (l/min) | 14.3 |
| Flow Rate at 2 Bar (l/min) | 16.5 |
| Flow Rate at 3 Bar (l/min) | 19.8 |
| Minimum Water PressureMore information | 0.1 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
