-
Click the image to zoom
-
Click the image to zoom
£34.99
Recommended Extras
We've hand-picked these items because they are a great choice alongside the Reginox Dania Single Lever Kitchen Mixer Tap with Swivel Spout
Reginox has carefully selected a range of stylish brassware to perfectly compliment your choice of sinktop. The ideal combination of style, compatibility, quality and performance...Reginox taps.
Features:
Dimensions:
Features:
- WRAS approved - read more about the WRAS approval scheme in our blog
- Solid brass body with polished chrome finish
- Low height, perfect for under-window positions or limited spaces
- Minimum of 0.5 bar & maximum of 6.0 bar water pressure
- Easy to clean and maintain
- Ceramic disc valves for improved performance and longer life span
- Pivoting spout ideal for 1.5 or double bowl sinks
- Includes tap fixing kit & flexible hose connectors
- 10 year guarantee
Dimensions:
- Overall height - 149mm
- Spout exit height - 118mm
- Projection - 207mm
- Minimum tap hole size - Ø35mm
- Maximum worktop thickness - 40mm
| Cleaning Instructions |
|---|
| Product Code | DANIACHII |
|---|---|
| Type | Mono Kitchen Mixers |
| Brand | Reginox |
| Brand Range | Reginox Dania |
| GuaranteeMore information | 10 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| AeratorMore information | Yes |
|---|---|
| Cartridge TypeMore information | Ceramic Disc |
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Finish | Polished Chrome |
| Shape | Round |
| Handle Type | Lever, Single Control |
| Spout Type | Straight Spout, Swivel Spout |
| Texture | Polished |
| Tap Holes | Mono |
| Style | Modern |
| Minimum Tap Hole Size (mm)More information | 35 |
|---|---|
| Height (mm) | 149 |
| Depth (mm) | 248 |
| Projection (mm) | 207 |
This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.
| Minimum Water PressureMore information | 0.5 |
|---|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
