-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
This pair of traditional Bath Pillar Taps help to bring the minimalist look to your traditional styled bathroom. With their eye-catching long-established crosshead styled valves on a bold curved spout, these bath taps are sure to offer a historic quality to your bathroom. These deck mounted bath taps will add sophistication and beauty to your bathroom. With ceramic disc technology, it also helps to give you peace of mind knowing that these luxurious taps won't have any excess drips or allow for leaks. Furthermore, it even comes with a generous 15 year standard warranty. So why look anywhere else?
Features:
Dimensions:
Features:
- Made from solid brass
- Available in a polished Chrome or Brushed Brass finish
- Ceramic Disc Technology
- Minimum pressure 0.2 bar
- Waste sold separately
- 15 year guarantee - (subject to online registration - please click here for further details)
Dimensions:
- Height: 158mm
- Projection: 90mm
 Cleaning Instructions
|
|---|
| Product Code | jtp-grosv-cross-bath-pillar-tp |
|---|---|
| Type | Bath Fillers, Bath Pillar Taps |
| Brand | JTP |
| Brand Range | JTP Grosvenor Cross |
| Guarantee |
15 Years |
| Global Trade Item Number | Select an option first |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Material | Brass |
|---|---|
| Number of Outlets | 2 Outlets |
| Temperature Control | Manual |
| Cartridge Type |
Ceramic Disc |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Shape | Round |
| Handle Type | Crosshead, Dual Control |
| Spout Type | Curved Spout |
| Tap Holes | 2 Holes |
| Style | Traditional |
| Finish | Select an option first |
| Texture | Select an option first |
| Width (mm) | 35 |
|---|---|
| Height (mm) | 158 |
| Projection (mm) | 90 |
| Flow Rate at 0.2 Bar (l/min) | 7.6 |
|---|---|
| Flow Rate at 0.5 Bar (l/min) | 8.6 |
| Flow Rate at 1 Bar (l/min) | 10 |
| Flow Rate at 2 Bar (l/min) | 14.8 |
| Flow Rate at 3 Bar (l/min) | 15.2 |
| Minimum Water Pressure |
1 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
