Skip to navigation Skip to content

Harbour Status Matt Black Wall Mounted Basin Mixer Tap

Rated 5.00/5 from 1 customer review

RRP £151.57 save 14%

£129.99

In stock | Get it Saturday

Order by 4pm Friday and select Saturday Delivery (S)

Delivery from £3.99. Spend £250+ for free delivery*. Read full delivery info

What's great about it?

  • Wall-mounted basin mixer with single lever, straight spout & backplate
  • Hard-wearing brassware with striking matt black finish
  • Ideal for use with basins with no pre-punched tap holes
  • 10 year guarantee
  • Suitable for medium & high water pressure systems

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Harbour Status Matt Black Wall Mounted Basin Mixer Tap

Harbour Status Matt Black Wall Mounted Basin Mixer Tap


Combining two of the latest bathroom trends - wall mounted taps and matt black finishes - the Harbour Status matt black wall mounted basin mixer is the epitome of modern bathroom design. The wall mounted design makes it ideal for use with a countertop basin and provides a 'cleaner,' less cluttered look around your basin.

With a matching basin waste, bath tap and shower all available, it's easier than ever to create a coordinated look in your bathroom. The Status even comes with a lifetime guarantee.

Features:
• Modern wall mounted design - keeps the area around your basin clear
• Striking matt black finish
• Made from solid brass
• Ceramic disc technology - long lasting and no drips
• Easy to use single lever design
• Minimum 0.5 bar water pressure required
• 10 year guarantee

Dimensions:
• Height - 100mm
• Projection - 170mm
• Width - 220mm
Product Code HBSTAT29
Global Trade Item Number 0729557187926
Type Wall Mounted Basin Taps
Brand Harbour
Brand Range Harbour Status
Minimum Water PressureMore information 0.5
Shape Rectangular
Finish Matt Black
Style Modern
Mounting Type Wall Mounted
Tap Holes 2 Holes
Spout Type Straight Spout, Fixed Spout
Handle Type Lever, Single Control
Cartridge TypeMore information Ceramic Disc
Orientation Landscape
Height (mm) 100
Projection (mm) 170
GuaranteeMore information 10 Years
Flow Rate at 0.2 Bar (l/min) 5.9
Flow Rate at 0.5 Bar (l/min) 9.1
Flow Rate at 1 Bar (l/min) 12.8
Flow Rate at 1.5 Bar (l/min) 15.6
Flow Rate at 2 Bar (l/min) 18.0
Flow Rate at 3 Bar (l/min) 22.0

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.

Guarantee

All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.