Skip to navigation Skip to content

Crosswater MPRO Wall Mounted Basin Mixer Tap - Matt Black

Rated 4.50/5 from 2 customer reviews

RRP £389 save 50%

£193.99 was £284.99

Loading delivery estimate...

Pay 3 interest-free instalments of £64.66 with Klarna Learn more about Klarna
Pay 4 interest-free instalments of £48.50 with Clearpay Learn more about Clearpay

What's great about it?

  • Wall-mounted 2 hole basin mixer with curved spout & single lever
  • Hard-wearing brassware with striking matt black finish
  • Wall-mounted installation with concealed fixings for a clutter-free countertop
  • Ideal for use with basins with no pre-punched tap holes
  • Suitable for medium & high water pressure systems
  • WRAS Approved

Read full product description


Recommended extras

We've hand-picked these items because they are a great choice alongside the Crosswater MPRO Wall Mounted Basin Mixer Tap - Matt Black

The Crosswater MPRO wall mounted basin mixer tap is the perfect minimalist addition to any contemporary bathroom - just look at that sleek matt black finish! Made from solid brass, this beautiful basin mixer comes with 2 spout projections of 150mm & 230mm to ensure a great fit for your bathroom, ceramic disc technology to prevent any unwanted excess dripping, and a single lever design for easy use. With all of these highly desirable features and a 15 year manufacturer’s guarantee, it’s the basin tap of our dreams!

  • Wall mounted basin tap - create a minimalist look in your bathroom
  • Eye-catching matt black finish
  • Made from solid brass
  • Comes with two spout lengths with a projection of either 150mm or 230mm
  • Single lever design for easy use
  • Ceramic disc technology - long lasting and no drips
  • Minimum 0.5 bar water pressure required
  • 15 year guarantee from Crosswater
  • WRAS Approved

  • Height - 95mm
  • Projection - 150mm or 230mm

Product Overview
Product Code PRO120WNM
Type 2 Hole Basin Mixers, Wall Mounted Basin Taps
Brand Crosswater
Brand Range Crosswater MPRO - Matt Black
GuaranteeMore information 15 Years


Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Material Brass
Cartridge TypeMore information Ceramic Disc
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Mounting Type Wall Mounted
Finish Matt Black
Shape Round
Handle Type Lever, Single Control
Spout Type Curved Spout
Texture Matt
Tap Holes 2 Holes
Style Modern
Width (mm) 181
Height (mm) 95
Depth (mm) 220
Projection (mm) 230
Flow Rate
Minimum Water PressureMore information 0.5

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Rated 4.50/5 from 2 customer reviews


Was £284.99

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.