Skip to navigation Skip to content

Clearwater Taku Single Lever Mono Kitchen Mixer Tap

Rated 5.00/5 from 1 customer review

RRP £204 save 15%

From £172.99

Please select an option

Loading delivery estimate...

Klarna
Pay 3 interest-free instalments of £57.66 with Klarna Learn more about Klarna
Clearpay
Pay 4 interest-free instalments of £43.25 with Clearpay Learn more about Clearpay

What's great about it?

  • Striking design with a blade shaped water flow
  • Available in a Polished Chrome, PVD Brushed Nickel, Matt Black or PVD Brushed Brass finish
  • 360° swivel spout for maximum flexibility
  • Water flow laminar stream straightener provides a higher flow rate
  • Minimum 0.3 bar water pressure required
  • 5 year manufacturer's guarantee

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Clearwater Taku Single Lever Mono Kitchen Mixer Tap

Features:
  • Striking design with a straight-edged spout that produces a blade shaped water flow
  • Available in a Polished Chrome, Brushed Nickel, Matt Black or Brushed Brass finish
  • Brushed Nickel and Brushed Brass design are PVD coated making them more resistant to scratches and everyday wear & tear and nano technology provides a more hygienic surface
  • Read more about the benefits of PVD coating as well as some aftercare tips in our Aftercare for Special Finishes blog
  • 360° swivel spout for maximum flexibility
  • Easy to use single lever design
  • The Taku has water flow laminar stream straighteners which provide a non-aerated water stream and therefore a higher flow rate
  • Minimum 0.3 bar water pressure required and suitable for use on low pressure systems
  • 5 year manufacturer's guarantee

Dimensions:
  • Overall height - 265mm
  • Spout exit height - 187mm
  • Projection - 188mm

Product Overview
Product Code clwtr-taku-mono-kitchen-tap-pv
Type Mono Kitchen Mixers
Brand Clearwater
Brand Range Clearwater Taku
GuaranteeMore information 5 Years

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 
Features
AeratorMore information No
Cartridge TypeMore information Ceramic Disc
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome. 
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Style
Mounting Type Deck Mounted
Shape Round, Square
Handle Type Lever, Single Control
Spout Type Straight Spout, 360 Degree Swivel Spout
Tap Holes Mono
Style Modern
Dimensions
Height (mm) 265
Projection (mm) 188
Flow Rate
Minimum Water PressureMore information 0.3

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

(1)
Rated 5.00/5 from 1 customer review

From £172.99

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.