-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
£239.99
Recommended extras
We've hand-picked these items because they are a great choice alongside the Clearwater Morpho Mono Kitchen Mixer with 'Flex & Stay' Spout - Brushed Nickel & Choice of Hose Colour
Say hello to true kitchen tap innovation with the Clearwater Morpho mono kitchen mixer. Before we get into the nitty-gritty, let's not forget how truly beautiful this contemporary kitchen tap is thanks to its sleek brushed nickel finish, and customisable hose. Choose one of four colours to add your personal touch to the Morpho; red, white, black, or grey.
Stunning modern design aside, the Morpho is far more than just a kitchen tap. This gorgeous mixer boasts a "flex & stay' spout making it possible for you to position the spout however you please, following which it will remain fixed there until you move it again. This is great for targeting hard-to-clean pans or simply directing the water flow in your preferred direction. There's more! The Morpho also contains an SLC neoperl aerator protecting you from any unwanted splashback, whilst simultaneously saving you money on your water bill. If all that hasn't convinced you, the Morpho also comes along with a rather reassuring 5 year manufacturer's guarantee too.
Features:
Dimensions:
Please note: When purchasing the Grey, Red & White hose options you will receive a tap with a Black hose as a standard and the chosen coloured hose is supplied in a separate box for an easy swap at your convenience.
Stunning modern design aside, the Morpho is far more than just a kitchen tap. This gorgeous mixer boasts a "flex & stay' spout making it possible for you to position the spout however you please, following which it will remain fixed there until you move it again. This is great for targeting hard-to-clean pans or simply directing the water flow in your preferred direction. There's more! The Morpho also contains an SLC neoperl aerator protecting you from any unwanted splashback, whilst simultaneously saving you money on your water bill. If all that hasn't convinced you, the Morpho also comes along with a rather reassuring 5 year manufacturer's guarantee too.
Features:
- Stunning brushed nickel finish
- Choice of hose colour - black, grey, red or white
- 360° swivel flex & stay spout
- Easy to use single lever design - control the water flow and temperature with one hand
- Ceramic disc technology prevents any drips once the tap is turned off
- SLC neoperl aerator
- Minimum water pressure of 1 bar required
- 5 year manufacturer's guarantee
Dimensions:
- Overall height - 438mm
- Spout exit height - 258mm
- Projection - 220mm
- Minimum tap hole size - 35mm
Please note: When purchasing the Grey, Red & White hose options you will receive a tap with a Black hose as a standard and the chosen coloured hose is supplied in a separate box for an easy swap at your convenience.
| Product Code | clearwater-morpho-nck-grey-hose |
|---|---|
| Type | Mono Kitchen Mixers, Pull Out Kitchen Taps |
| Brand | Clearwater |
| Brand Range | Clearwater Morpho |
| GuaranteeMore information | 5 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| AeratorMore information | Yes |
|---|---|
| Cartridge TypeMore information | Ceramic Disc |
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Shape | Round |
| Handle Type | Lever, Single Control |
| Spout Type | Flexible Spout, 360 Degree Swivel Spout |
| Tap Holes | Mono |
| Style | Modern |
| Finish | Brushed Nickel, Grey |
| Texture | Brushed |
| Minimum Tap Hole Size (mm)More information | 35 |
|---|---|
| Height (mm) | 438 |
| Projection (mm) | 220 |
This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.
| Minimum Water PressureMore information | 1 |
|---|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
Advice guides
-
The Different Types of Pull Out Kitchen Taps
The choice of pull out kitchen taps on the market can appear overwhelming, especially if you’re not entirely sure what you’re looking for. In this guide we’ll run through the different types of pull out kitchen taps. We’ll tell you the difference between spring-loaded pull out taps and weighted pull out taps, and whether you need a pull out tap with multiple spray functions or not. -
Why a Pull Out Spray Kitchen Tap Is the Ultimate Accessory
There are many unsurpassable benefits to having a pull out kitchen tap with a spray hose, so discover the reasons why every kitchen should have one.
