Skip to navigation Skip to content

Clearwater Juno WRAS Approved Single Lever Industrial-Style Mono Kitchen Mixer Tap

No reviews yet - Write one

RRP £289.00 save 24%


Please select an option

In stock | Get it tomorrow

Order by 4pm and select Next Day Delivery (S)

What's great about it?

  • Available in 4 different finishes
  • WRAS Approved Industrial-style mono kitchen tap
  • Cold start technology - when the lever is upright only cold, not mixed water is dispensed
  • Anti-scale aerator for a soft water flow
  • Ceramic disc technology and minimum 0.5 bar water pressure required
  • 5 year manufacturer's guarantee

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Clearwater Juno WRAS Approved Single Lever Industrial-Style Mono Kitchen Mixer Tap

Clearwater Juno WRAS Approved Single Lever Industrial-Style Mono Kitchen Mixer Tap

• Available in 4 different finishes - Chrome, Nickel, Matt Black and Brushed Brass
• Brushed Nickel and Brushed Brass are PVD coated - helps to withstand damage and provides a more hygienic surface
• 'On trend' industrial design with an easy to use single lever design
• WRAS approved
• Cold start ceramic disc technology to help you save on your energy bill - only cold water is dispensed when the handle is in the upright position unlike most mixer taps
• 360° swivel spout for maximum flexibility in the kitchen
• Anti-scale SLC aerator - provides a 'soft' flow of water and helps prevent limescale build up
• Minimum 0.5 bar water pressure required
• 5 year guarantee

• Overall height - 323mm
• Spout exit height - 250mm
• Projection - 203mm
Product Code JUL10BB
Type Mono Kitchen Mixers
Brand Clearwater
Brand Range Clearwater Juno
Minimum Water PressureMore information 0.5
Shape Round
Style Modern
Mounting Type Deck Mounted
Tap Holes Mono
Spout Type U-Shaped Spout, 360 Degree Swivel Spout
Handle Type Lever, Single Control
Cartridge TypeMore information Ceramic Disc
Height (mm) 323
Projection (mm) 203
AeratorMore information Yes
GuaranteeMore information 5 Years
Finish Brushed Brass

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome. 


All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.


In stock | Get it tomorrow


Was £229.99

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.