Recommended extras
We've hand-picked these items because they are a great choice alongside the Butler & Rose 3-in-1 Traditional Instant Hot Water Kitchen Mixer & Filter Unit - Brushed Copper
- Traditional-style Butler & Rose brushed copper tap
- WRAS approved boiler tank
- Filter kit
Tap Features:
- Classic brushed copper finish - keep it looking clean with the Cramer Tap Cleaner
- Dual lever design - one lever for standard hot & cold water; the other lever for instant hot water
- Child-safe spring lock technology - handle must be pressed and turned at the same time to release steaming hot water
- 360° swivel spout - perfect for if you have a 1.5 or 2 bowl sink
- Compression washers
- Aerated spout for a soft, splash-free water flow
- Minimum 1 bar water pressure required
- Maximum 3 bar water pressure
- 2 year guarantee
Boiler Features:
- Instant filtered near-boiling water at the turn of a handle
- Included filter ensures your hot drinks are always made from pure, filtered water
- Delivers up to 6 mugs of instant hot water at a time
- Easy to use digital touch screen operation
- Adjustable temperature from 75-98°C
- Stainless steel tank prevents rust and corrosion
- Requires standard 220-240V 13 amp socket - no electrician required for installation
- Float sensor detects water level in the tank to avoid damage to the unit
- 2 year guarantee
Tap Dimensions:
- Overall height - 398mm
- Spout exit height - 270mm
- Projection - 207.5mm
Boiler Dimensions:
- Height - 335mm
- Depth - 210mm
- Width - 210mm
Product Code | BTF009 |
---|---|
Type | Mono Kitchen Mixers, Boiling Water Taps |
Brand | Butler & Rose |
Brand Range | Butler & Rose Boiling Taps |
GuaranteeMore information | 2 Years |
Guarantee
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
AeratorMore information | Yes |
---|---|
Cartridge TypeMore information | Compression Washer |
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Mounting Type | Deck Mounted |
---|---|
Finish | Brushed Copper |
Shape | Round |
Handle Type | Lever, Dual Control |
Spout Type | Swan Neck Spout, Swivel Spout |
Texture | Brushed |
Tap Holes | Mono |
Style | Traditional |
Height (mm) | 398 |
---|---|
Projection (mm) | 207 |
Flow Rate at 1 Bar (l/min) | 7.2 |
---|---|
Flow Rate at 2 Bar (l/min) | 8 |
Flow Rate at 3 Bar (l/min) | 9.2 |
Minimum Water PressureMore information | 1 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
Need more help?
£499.99
Advice guides
-
Kitchen Ideas 2023
Need some kitchen design inspiration? From choosing the perfect taps to new design styles, we take you through our picks for the top kitchen trends of 2023. -
Boiling Water Taps Guide
From water temperatures and pressure to cost and installation, we take you through everything you need to know about boiling water taps.