-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
The humble bidet is no longer quite as popular as it has been in previous years, but that doesn't take away from the fact that it's a wonderfully hygienic and practical addition to your bathroom. And what good would a bidet be without a bidet mixer to accompany it? The Burlington Kensington Bidet Mixer combines beautiful traditional style with modern tapware technology. Ceramic disc cartridges are controlled by white ceramic tap levers that are adorned with Burlington's signature branded caps to indicate the hot and cold outlets. Regardless if you have low or high water pressure in your home, this mixer will function perfectly thanks to the Neopearl flow straightener and aerator which provides a consistent stream of water with every use.
Features:
Dimensions:
Features:
- Deck mounted bidet mixer
- Pop-up bidet waste included
- Suitable for low and high water pressure
- Manufactured from solid brass and white ceramic
- Ceramic disc technology
- Neopearl aerator and flow straightener
- 10 year guarantee
Dimensions:
- Height - 152mm
- Width - 208.3mm
- Depth - 130mm
|
|
|---|
| Product Code | KE13-QT |
|---|---|
| Global Trade Item Number | 5055806007260 |
| Type | Bidet Mixers |
| Brand | Burlington |
| Brand Range | Burlington Kensington |
| Guarantee |
10 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Material | Brass |
|---|---|
| Cartridge Type |
Ceramic Disc |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Finish | Chrome |
| Shape | Round |
| Handle Type | Dual Control, Lever |
| Spout Type | Fixed Spout, Straight Spout |
| Texture | Polished |
| Tap Holes | Mono |
| Style | Traditional |
| Width (mm) | 208 |
|---|---|
| Height (mm) | 152 |
| Depth (mm) | 130 |
| Projection (mm) | 107 |
| Minimum Water Pressure |
0.2 |
|---|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Need more help?
Products from the same range
You may also like
Customers also bought
We're here for you
Advice guides
-
Bathrooms on a Budget - 15 Simple and Cheap Bathroom Ideas
We've pulled together this great list of simple and cheap bathroom ideas from colourful basins to hanging artwork and peel and stick flooring. Don't miss these great ideas for bathrooms on a budget. -
Colourful Bathroom Ideas
Colourful bathrooms are growing in popularity and it’s becoming as standard as the traditional white three-piece. Here's some simple and fun colourful bathroom ideas to get your creativity flowing! -
Which Kitchen & Bathroom Investments Add the Most Value to Your Home?
When selling a home, people will often be confused where they should invest to add value. In this guide we take you through where you should spend your money to achieve the best return. -
Traditional Bathroom Ideas: How To Get The Traditional Look
Tackling traditional bathroom design is no mean feat when you’re not sure where to start. That’s why we’ve popped together this handy guide outlining all of the essential elements of period bathroom design, so you can get checking items off the list and bask in the sublime classic luxury of your own home. Let’s get stuck in!