-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
There's a distinctly regal charm about Burlington's Anglesey Bath Shower Mixer. Crafted using the finest solid brass, then plated in polished chrome and with white ceramic accents to finish, this tap has all of the makings to be a wonderful feature in your traditional bathroom. The crosshead handles with ceramic indices are the real stand-out feature of this mixer tap, as they provide an element of shape and semblance to what would've been found in Classical bathrooms from decades ago.
This bath shower mixer comes with Burlington's signature 'S' adjuster which allows you to position the telephone handset over the bath to ensure every last drop of water falls into the tub, and not onto the tap ledge. This reduces cleaning, mould and potential water ingress at the perimeter of the bath. You can install your Bath Shower Mixer with or without this feature.
The Burlington Anglesey Regent also has an extension on its base, meaning the spout is a further 3cm away from the wall than the standard model. This creates an opulent feel, and in certain commercial applications, ensures compliance with some building regulations. The extended height of the Anglesey Regent makes it perfect for use in combination with a large roll-top bathtub; a lavish and luxurious addition to your home.
Supplied with two Neoperl devices - a flow straighter which is for use with low water pressures and an aerator which is for use with high water pressures, this mixer was designed to deliver the following maximum flows of water, regardless of the incoming water pressure (22 litres per minute). This way you can have fabulous performance without wasting any water.
The bath shower mixer includes:
Features:
Dimensions:
This bath shower mixer comes with Burlington's signature 'S' adjuster which allows you to position the telephone handset over the bath to ensure every last drop of water falls into the tub, and not onto the tap ledge. This reduces cleaning, mould and potential water ingress at the perimeter of the bath. You can install your Bath Shower Mixer with or without this feature.
The Burlington Anglesey Regent also has an extension on its base, meaning the spout is a further 3cm away from the wall than the standard model. This creates an opulent feel, and in certain commercial applications, ensures compliance with some building regulations. The extended height of the Anglesey Regent makes it perfect for use in combination with a large roll-top bathtub; a lavish and luxurious addition to your home.
Supplied with two Neoperl devices - a flow straighter which is for use with low water pressures and an aerator which is for use with high water pressures, this mixer was designed to deliver the following maximum flows of water, regardless of the incoming water pressure (22 litres per minute). This way you can have fabulous performance without wasting any water.
The bath shower mixer includes:
- Swivel spout
- Traditional ceramic telephone shower handset
- Standard cradle & 'S' adjuster
- White ceramic diverter lever
- 1200mm high-flow 'anti-kink' hose
- Wall mounting unions with a 30mm extension
- Pair of Anglesey tap handles with a four spindle head & ceramic indices
Features:
- Wall-mounted installation for a clutter-free deck
- Crafted from solid brass with polished chrome finish
- Quarter turn ceramic disc technology for improved performance & longer life span
- 'S' adjuster for handset positioning
- Separated controls for hot & cold supply
- Spout swivels so it is not in the way when you shower
- 10 year guarantee
- Suitable for all water pressures: from 0.2 to 5 bar
- Supplied with flow straighter for use with low water pressure
- Supplied with anti-splash NEOPERL® aerator for use with high water pressure
- Waste not included
Dimensions:
- Width - 236mm
- Height - 470mm
- Depth - 157mm
| Cleaning Instructions |
|---|
| Product Code | ANR17-QT |
|---|---|
| Type | 2 Hole Bath Taps, Bridge Bath Taps, Wall Mounted Bath Shower Mixers, Wall Mounted Bath Taps |
| Brand | Burlington |
| Brand Range | Burlington Anglesey Regent |
| GuaranteeMore information | 10 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Material | Brass |
|---|---|
| Number of Outlets | 2 Outlets |
| Temperature Control | Manual |
| Cartridge TypeMore information | Ceramic Disc |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Wall Mounted |
|---|---|
| Finish | Chrome |
| Shape | Round |
| Handle Type | Crosshead, Lever, Triple Control |
| Spout Type | Fixed Spout, L-Shaped Spout |
| Texture | Polished |
| Tap Holes | 2 Holes |
| Style | Traditional |
| Width (mm) | 236 |
|---|---|
| Height (mm) | 470 |
| Depth (mm) | 157 |
| Projection (mm) | 126 |
| Minimum Water PressureMore information | 0.2 |
|---|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Related categories
We're here for you
Advice guides
-
Bath Taps: A Complete Guide to Help You Decide
At Tap Warehouse we stock an enormous range of bath taps for you to choose from. In fact, there are just so many that we can’t even decide which our favourites actually are… We’ve tried our hardest though, and narrowed it down to some of the very best taps for all budgets and styles for you to peruse below. -
Bathroom Taps: What You Need to Know
There is a huge variety of bathroom taps out there. This guide walks you through the questions that you should be asking yourself before choosing new taps for your bathroom.
