Skip to navigation Skip to content

Burlington Anglesey Deck Mounted Bath Pillar Taps

No reviews yet - Write one

RRP £214 save 40%

From £127.99 was £156.99

Please select an option

Loading delivery estimate...

Pay 3 interest-free instalments of £42.66 with Klarna Learn more about Klarna
Pay 4 interest-free instalments of £32.00 with Clearpay Learn more about Clearpay

What's great about it?

  • Deck-mounted bath pillar tap pair with traditional styling to suit a range of baths
  • Made from reliable solid brass and finished in Polished Chrome adding sleek appeal
  • H: 139mm, W: 64mm, Projection: 126mm
  • Quarter-turn ceramic disc valve cartridges ensure easy operation and leak-free longevity
  • Fitted with a flow straightener and aerator to avoid splashes and maintain an even stream

Read full product description


Recommended extras

We've hand-picked these items because they are a great choice alongside the Burlington Anglesey Deck Mounted Bath Pillar Taps

Take your bathtub back to a more traditional time with these Anglesey Deck Mounted Bath Pillar Taps from Burlington. The delicate, curved spouts reach into the bathtub and add a real splash of charm and splendour to the room. Four spoke tap handles are the favoured feature of these taps though, given that they add such period elegance to the overall design. Crafted from solid brass and with a polished chrome finish, this pair of bath taps are also topped off with Burlington's signature white ceramic indices.

Although these taps are classically styled for a traditional setting, they certainly don't hold back when it comes to modern technology. They are supplied with a Neopearl flow straightener and Neopearl aerator which are used depending what on type of water pressure you have in your home, however they are fully suitable for any pressure between 0.2 - 5 bar. Ceramic disc cartridges also give you an effortless quarter-turn operation to make bathtime an absolute treat.

  • Suitable for low and high pressure water systems
  • Crafted from solid brass and white ceramic
  • Finished in polished chrome
  • Supplied with Neopearl flow straightener and aerator
  • Quarter-turn, ceramic disc cartridges
  • 10 year guarantee

  • Width - 64mm
  • Height - 139mm
  • Depth - 126mm

Product Overview
Product Code AN3-PV
Type Bath Fillers, Bath Pillar Taps
Brand Burlington
Brand Range Burlington Anglesey
GuaranteeMore information 10 Years


All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Material Brass
Number of Outlets 2 Outlets
Temperature Control Manual
Cartridge TypeMore information Ceramic Disc
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Mounting Type Deck Mounted
Finish Chrome
Shape Round
Handle Type Crosshead, Dual Control
Spout Type Straight Spout
Texture Polished
Tap Holes 2 Holes
Style Traditional
Width (mm) 64
Height (mm) 139
Depth (mm) 126
Projection (mm) 126
Flow Rate
Minimum Water PressureMore information 0.2

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

No reviews yet - Write one

From £127.99

Was £156.99

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.