-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
Give your basin a classic style update with the Eliza pillar taps. This traditional two-tap setup brings a symmetrical look to your space and comes in a choice of finishes to match the rest of your bathroom. The ceramic-style levers are easy to grip, even with wet hands, giving you simple, dedicated control over water flow. Whether you’re swapping out old taps or starting a fresh project, the Eliza range is a reliable way to add character to your daily routine.
Features:
Features:
- Classic two-tap design brings a balanced, timeless look to your basin, adding instant character
- Ceramic-style levers are easy to grip, making it simple to manage water flow, even with soapy hands
- Durable brass construction is naturally resistant to rust and corrosion for long-lasting reliability
- Ceramic discs ensure the handles turn smoothly and stop the taps from dripping when turned off
- Stream straightener creates a smooth water flow to reduce splashback and keep the basin area dry
- Choose from a range of finishes to coordinate with your basin, bath taps and accessories
- Works with pressure as low as 0.2 bar for stable performance across different plumbing setups
- Designed for two-hole basins with standard 1/2" connections for easy installation or replacement
- Waste sold separately, please see our recommended extras for a finish that complements your basin
- Designed to pair with the wider Butler & Rose Eliza range to create a cohesive look in your space
- 10 year manufacturer’s guarantee on chrome, with a 5 year manufacturer’s guarantee for all other finishes
| Product Code | br-eliza-lvr-basin-pillar-taps |
|---|---|
| Type | 2 Hole Basin Mixers, Basin Pillar Taps |
| Brand | Butler & Rose |
| Brand Range | Butler & Rose Eliza |
| GuaranteeMore information | Various |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| AeratorMore information | No |
|---|---|
| Material | Brass, Ceramic, Zinc Alloy |
| Cartridge TypeMore information | Ceramic Disc |
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Shape | Curved, Round |
| Handle Type | Dual Control, Lever |
| Spout Type | Curved Spout, Fixed Spout |
| Tap Holes | 2 Holes |
| Style | Traditional |
| Finish | Select an option first |
| Texture | Select an option first |
| Width (mm) | 44 |
|---|---|
| Height (mm) | 91 |
| Depth (mm) | 107 |
| Projection (mm) | 85 |
| Flow Rate at 0.2 Bar (l/min) | 8.8 |
|---|---|
| Flow Rate at 0.5 Bar (l/min) | 15.4 |
| Flow Rate at 1 Bar (l/min) | 22.5 |
| Flow Rate at 1.5 Bar (l/min) | 27.5 |
| Flow Rate at 2 Bar (l/min) | 31.5 |
| Flow Rate at 3 Bar (l/min) | 39.1 |
| Flow Rate at 5 Bar (l/min) | 49.5 |
| Minimum Water PressureMore information | 0.2 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
