Skip to navigation Skip to content

Blanco Lanora Eco Cold Start WRAS Approved Brushed Stainless Steel Mono Kitchen Mixer Tap

No reviews yet - Write one

RRP £381.60 save 16%


Loading delivery estimate...

Pay 3 interest-free instalments of £106.66 with Klarna Learn more about Klarna
Pay 4 interest-free instalments of £80.00 with Clearpay Learn more about Clearpay

What's great about it?

  • WRAS approved modern kitchen tap
  • Made from solid stainless steel with an elegant brushed finish
  • Rust and corrosion resistant
  • High spout makes filling pots, pans and vases easier
  • Energy-saving cold start technology saves money on your energy bill
  • Ceramic disc technology - smooth operation and no drips
  • Minimum 1 bar water pressure required
  • Patented jet regulator reduces limescale buildup in the nozzle

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Blanco Lanora Eco Cold Start WRAS Approved Brushed Stainless Steel Mono Kitchen Mixer Tap

Blanco Lanora WRAS Approved Brushed Stainless Steel Mono Kitchen Mixer Tap

• Modern WRAS approved kitchen tap - read more about the WRAS approval scheme in our blog
• Made from solid stainless steel with an elegant brushed finish
• High spout makes filling pots, pans and vases easier
• Easy to use single lever control with energy-saving cold start technology
• Ceramic disc technology - long-lasting and no drips
• Requires a minimum 1 bar water pressure
• Patented jet regulator reduces limescale build-up
• Includes 450mm flexi-tail connectors for easy installation

• Overall height - 295.7mm
• Spout exit height - 266.4mm
• Projection - 220mm
• Minimum tap hole size - Ø35mm

WRAS Approved
Product Code BLANCO523122
Global Trade Item Number 4020684674409
Type Mono Kitchen Mixers
Brand Blanco
Brand Range Blanco Lanora
Height (mm) 296
Mounting Type Deck Mounted
Finish Brushed Stainless Steel
Shape Round
Handle Type Lever, Single Control
Spout Type L-Shaped Spout, Swivel Spout
Minimum Water PressureMore information 1
Tap Holes Mono
Style Modern
GuaranteeMore information 5 Years
Projection (mm) 220
Minimum Tap Hole SizeMore information 35mm
Cartridge TypeMore information Ceramic Disc

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.


All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.


This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.


Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.