We've hand-picked these items because they are a great choice alongside the Crosswater MPRO Industrial Bath Spout - Chrome
Nothing says urban luxury quite like the Crosswater MPRO Industrial bath spout. This striking modern piece boasts a stylish textured design with knurled detailing for an added touch of elegance, alongside a timeless chrome finish for a touch of vintage aesthetic.
Pair this beautiful bath spout with an MPRO Industrial chrome diverter or even take the leap and bask in the luxury of the full industrial chrome collection if you're after some serious style in your bathroom! Wall mounted for a modern yet subtle minimalist feel, this eye-catching curved bath spout even come with a 15 year manufacturer's guarantee, so you can be certain it's of stellar quality and rest easy knowing that this bathing beauty was built to last.
- Crosswater MPRO is a combination of modern design incorporating an industrial and vintage feel with functionality
- Timeless and classic chrome finish
- Wall mounted
- Minimum recommended water pressure: 1 bar
- Spout only please see recommended extras for wall stop taps if required
- 15 year manufacturers guarantee
- Projection: 175mm
|Global Trade Item Number
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Cartridge TypeMore information
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Minimum Water PressureMore information
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
Need more help?
At Tap Warehouse we stock an enormous range of bath taps for you to choose from. In fact, there are just so many that we can’t even decide which our favourites actually are… We’ve tried our hardest though, and narrowed it down to some of the very best taps for all budgets and styles for you to peruse below.