We've hand-picked these items because they are a great choice alongside the Vado Phase 2 Hole Bath Filler
- WRAS approved
- Twin lever for independent control over hot & cold water supply
- Quarter turn ceramic disc technology for improved performance & longer life span
- Hard wearing and durable brass construction
- Anti-corrosion high-shine chrome coating
- Minimum of 0.2 bar water pressure
- Maximum of 3.0 bar water pressure
- Waste not included
- 15 year warranty
|Global Trade Item Number||5052120143766|
|Type||Bath Fillers, Bridge Bath Taps|
|Brand Range||Vado Phase|
|GuaranteeMore information||15 Years|
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
|Number of Outlets||1 Outlet|
|Cartridge TypeMore information||Ceramic Disc|
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
|Mounting Type||Deck Mounted|
|Handle Type||Lever, Dual Control|
|Spout Type||Straight Spout|
|Tap Holes||2 Holes|
|Flow Rate at 3 Bar (l/min)||46|
|Minimum Water PressureMore information||0.2|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
For most of us, our taps will last a lifetime, however sometimes tap cartridges need to be replaced at some point. This guide walks you through this process to changing your cartridge to help you prolong the life of your tap.
At Tap Warehouse we stock an enormous range of bath taps for you to choose from. In fact, there are just so many that we can’t even decide which our favourites actually are… We’ve tried our hardest though, and narrowed it down to some of the very best taps for all budgets and styles for you to peruse below.
A collection of some of the best performing low water-pressure taps - all available at amazing prices.
New bathroom basin taps are a great way of enhancing the overall look of your bathroom, en-suite or cloakroom bathroom without the need to spend money on a complete refurbishment. Choosing, however, is not quite as straightforward as it sounds, so we've put together a guide to explain the different types of basin taps and what you should be on the look out for.
GONE are the days before ceramic disc taps. That's right - no more rubber rings screwed over the end of metal pipes, splitting as they wear down, leaking and costing every homeowner thousands a year in water bills. Learn why choosing taps with ceramic disc cartridges is the smartest option for you and your home.