Skip to navigation Skip to content

Perrin & Rowe Callisto 3 Hole Lever 'C' Spout Sink Mixer

Rated 3.00/5 from 1 customer review

RRP £536.00 save 16%

From £449.99

Please select an option

Estimated delivery 3-7 working days

Select an option to see delivery estimates

FREE standard delivery*. Read full delivery info

What's great about it?

  • Modern 3 hole sink mixer with swan neck spout & twin lever handles
  • 3 finishes available: Chrome, Nickel or Pewter
  • Single flow tap for better flow rare & well-mixed water
  • Twin levers for independent hot & cold flow control
  • Suitable for high water pressure systems

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Perrin & Rowe Callisto 3 Hole Lever 'C' Spout Sink Mixer

Perrin & Rowe Callisto 3 Hole Lever 'C' Spout Sink Mixer


The Callisto straddles both contemporary and classic design and is available with either crosshead or lever handles. This three or four hole tap is designed to be work top mounted usually behind undermount sinks. This combination results in a most sophisticated arrangement.

Quality Promise:
• Manufactured in the UK from the highest quality raw materials
• Employing the latest available technology and made from low lead brass
• Plated to a thickness that exceeds industry standards
• Assembled by hand and individually water tested to ensure peace of mind
• Made with ceramic disk valves supplied by the world's leading manufacturer, tested to 5000,000 life cycles, equating to at least 25 years of domestic use.

Made in Britain


Features:
• Available in chrome, nickel or pewter finish
• 5 year guarantee
• Minimum 1 bar pressure required
• 360° swivel spout
• Maximum water pressure - 5 Bar
• Quarter turn ceramic disc flow control
• Single flow spout
• Vernier insert for accurate handle alignment
• Unique handle construction with integral bearing ring
• Includes flexible connectors for easier installation
• Twin lever handles

Dimensions:
• Spout mounting hole - 35mm diameter
• Controls mounting hole - 30mm diameter
Downloads Product PDF
Product Code 4886cp-pv
Type 3 Hole Kitchen Taps
Brand Perrin & Rowe
Brand Range Perrin & Rowe Callisto
Minimum Water PressureMore information 1
Shape Round
Style Traditional
Mounting Type Deck Mounted
Tap Holes 3 Holes
Spout Type Swan Neck Spout, Swivel Spout
Handle Type Lever, Dual Control
Cartridge TypeMore information Ceramic Disc
Height (mm) 370
Projection (mm) 230
GuaranteeMore information 5 Years

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.

Guarantee

All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.