Skip to navigation Skip to content

Proflow Track Bath Shower Mixer Tap with Shower Kit

No reviews yet - Write one

RRP £239.00 save 25%


Estimated delivery 3-7 working days Help?

Too long to wait? View similar products with next day shipping

Delivery from £3.99. Spend £250+ for free delivery*. Read full delivery info

What's great about it?

  • Deck-mounted bath shower mixer with handset and cylindrical design to suit modern baths
  • Manufactured from reliable solid brass and finished in rust-resistant Polished Chrome
  • H: 128mm, W: 213mm, D: 155mm
  • Fitted with ceramic disc cartridge technology for easy turning and leak-free longevity
  • Supplied with matching handset wall bracket for tidy storage when not in use

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Proflow Track Bath Shower Mixer Tap with Shower Kit

Proflow Track Bath Shower Mixer Tap

Sweeping curves and a distinctive oval shape reminsicent of a running track, the Track range from Proflow is stylish and superb quality. With ceramic disc cartridges and excellent flow rates even on low pressure systems, these taps are superb value for money.

• Proflow Track taps are manufactured by Crosswater Holdings, a renowned bathroom brand with many years of experience. As such they are very high quality, with excellent flow rates and quality chrome-plating.
• Ceramic disc cartridges for long life
• 1/4 turn on/off for ease of use
• Suitable for low and high pressure (minimum 0.2 bar)
• Waste sold separately

These taps are specifically made to work well even on low pressure gravity systems. You normally only find this attention to detail on far more expensive taps. For your convenience, we have listed some estimated flow rates below:

Flow rates:
• 19li/min at 0.2 bar
• 23li/min at 0.5 bar
• 35li/min at 1 bar
• 52li/min at 2 bar

To put this in perspective, an 18 litre flow per minute is considered reasonable for bath taps, where it will take about 5 - 10 minutes to fill a standard sized bath to its usable level. Flow restricters can be fitted to your plumbing if you're concerned about water usage and its effects on the environment.
Product Code MBST422D
Global Trade Item Number 5055833603558
Type Bath Shower Mixers, Bridge Bath Taps
Brand Proflow
Brand Range Proflow Track
Minimum Water PressureMore information 0.2
Shape Round, Microphone
Finish Polished Chrome
Style Modern
Mounting Type Deck Mounted
Tap Holes 2 Holes
Spout Type L-Shaped Spout
Handle Type Lever, Dual Control
Cartridge TypeMore information Ceramic Disc
Temperature Control Manual
Number of Outlets 2 Outlets
Height (mm) 128
Projection (mm) 110
GuaranteeMore information 5 Years

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.


All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.


Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.