£179.99
Recommended Extras
We've hand-picked these items because they are a great choice alongside the Harbour Status 3 Outlet Concealed Thermostatic Shower Valve
- Modern 3 outlet concealed design with triple handle control
- Stunning Polished Chrome finish
- Thermostatic valve with auto-shut off mechanism protects you from sudden changes in temperature, helping prevent scalding
- Anti Calc thermostatic cartridge - advanced anti-debris technology that helps prevent blockage & limescale build-up for effortless temperature control
- Ceramic disc technology prevents any unwanted leaks or drips
- Triple handle control - top and bottom handles direct the flow of water between outlets & the middle handle controls the water temperature
- Interchangeable backplate design allows portrait or landscape orientation
- Crafted from brass (valve body), stainless steel (backplate) & zinc alloy (handles)
- Minimum water pressure required: 0.5 bar
- WRAS Approved
- Complies with BSEN 1111
- Shower head or shower handset sold separately, please see our recommended extras
- Covered by a 10 year manufacturer’s guarantee
Dimensions:
- Height: 285mm
- Width: 130mm
- Depth: 131.5mm
Flow rates:
- 0.5 bar (l/min): 10.0
- 1.0 bar (l/min): 14.0
- 1.5 bar (l/min): 17.1
- 2.0 bar (l/min): 19.8
- 3.0 bar (l/min): 24.4
- 4.0 bar (l/min): 28.1
- 5.0 bar (l/min): 31.6
Product Code | HBSTAT68 |
---|---|
Type | Concealed Shower Valves |
Brand | Harbour |
Brand Range | Harbour Status |
GuaranteeMore information | 10 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
Material | Brass, Stainless Steel, Zinc Alloy |
---|---|
Number of Outlets | 3 Outlets |
Temperature Control | Thermostatic |
Cartridge TypeMore information | Ceramic Disc |
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Mounting Type | Wall Mounted |
---|---|
Finish | Polished Chrome |
Shape | Square |
Handle Type | Square, Triple Control |
Texture | Polished |
Style | Modern |
Orientation | Landscape, Portrait |
Width (mm) | 130 |
---|---|
Height (mm) | 285 |
Depth (mm) | 132 |
Flow Rate at 0.5 Bar (l/min) | 10 |
---|---|
Flow Rate at 1 Bar (l/min) | 14 |
Flow Rate at 1.5 Bar (l/min) | 17.1 |
Flow Rate at 2 Bar (l/min) | 19.8 |
Flow Rate at 3 Bar (l/min) | 24.4 |
Flow Rate at 4 Bar (l/min) | 28.1 |
Flow Rate at 5 Bar (l/min) | 31.6 |
Minimum Water PressureMore information | 0.5 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.