-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
Traditional can be beautiful with the nuie Beaumont Luxury 3/4" Cranked Bath Shower Mixer. The classically styled shower wand combined with the high gloss chrome finish make this bath shower mixer one that will go with a variety of decorating styles. The styling and 10-year guarantee that is offered by nuie ensure that you will have a beautiful mixer and one that you can depend on.
Features:
Features:
- Hard wearing and durable brass construction
- Rust-resistant high-shine chrome coating
- Includes hand shower and hose
- Non-thermostatic manual temperature control
- Deck-mount installation
- Screw down cartridge
- Pipe Size: 22 mm (3/4" BSP)
- Adjustable pipe centres: 130mm - 260mm
- Waste sold separately
- Includes deck plate
- 0.1 bar minimum operating pressure
- 5 year warranty
| Cleaning Instructions |
|---|
| Product Code | I303X |
|---|---|
| Type | Bath Shower Mixers, Bridge Bath Taps |
| Brand | nuie |
| Brand Range | nuie Beaumont |
| GuaranteeMore information | 5 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Number of Outlets | 2 Outlets |
|---|---|
| Temperature Control | Manual |
| Cartridge TypeMore information | Compression Washer |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Finish | Polished Chrome |
| Shape | Round |
| Handle Type | Crosshead, Lever, Triple Control |
| Spout Type | Curved Spout |
| Texture | Polished |
| Tap Holes | 2 Holes |
| Style | Traditional |
| Height (mm) | 295 |
|---|---|
| Projection (mm) | 155 |
| Flow Rate at 0.1 Bar (l/min) | 12 |
|---|---|
| Flow Rate at 0.5 Bar (l/min) | 36 |
| Flow Rate at 1 Bar (l/min) | 48 |
| Minimum Water PressureMore information | 0.1 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.