Skip to navigation Skip to content

Harbour Status Matt Black Floorstanding Bath Shower Mixer Tap

Rated 4.40/5 from 5 customer reviews

RRP £680 save 43%


Loading delivery estimate...

Pay 3 interest-free instalments of £129.99 with Klarna Learn more about Klarna
Pay 4 interest-free instalments of £97.50 with Clearpay Learn more about Clearpay

What's great about it?

  • Floor-mounted bath shower mixer with modern, angular design to suit contemporary bathrooms
  • Manufactured from reliable solid brass and finished in Matt Black for a clean, bold look
  • H: 986mm, W: 185mm, D: 280mm
  • Fitted with ceramic disc cartridge valves for easy turning and leak-free longevity
  • Single lever allows for control of temperature and flow rate while holding the handset

Read full product description

Recommended extras

We've hand-picked these items because they are a great choice alongside the Harbour Status Matt Black Floorstanding Bath Shower Mixer Tap

The Harbour Status matt black range of bathroom taps aren't what you might call discreet, but should the rest of the range be a bit too understated for you, then you need the Harbour Staus matt black floorstanding bath shower mixer. With a matching shower handset, it comes with everything you need to turn your bathroom into a place of calm.

Also in the Status range is a matching bath waste and tall basin mixer to help you create a coordinated look in your bathroom. The matt black Status range also comes with a 10 year guarantee.

  • Includes matching shower handset and hose
  • Floorstanding design for the ultimate look of luxury in your bathroom
  • Eye-catching matt black finish
  • Tap is made from solid brass and the handset is made from tough ABS plastic
  • Ceramic disc technology - long lasting and no drips
  • Minimum 1 bar water pressure required
  • Easy to use single lever control
  • 10 year guarantee

  • Overall height - 986mm
  • Spout exit height - 865mm
  • Projection - 226.5mm

Product Overview
Product Code HBSTAT27
Global Trade Item Number 0729557187940
Type Bath Shower Mixers, Freestanding Bath Taps
Brand Harbour
Brand Range Harbour Status
GuaranteeMore information 10 Years


All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

Number of Outlets 2 Outlets
Temperature Control Manual
Cartridge TypeMore information Ceramic Disc
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Mounting Type Freestanding
Finish Matt Black
Shape Square, Microphone
Handle Type Lever, Single Control
Spout Type L-Shaped Spout
Texture Matt
Tap Holes Mono
Style Modern
Width (mm) 185
Height (mm) 986
Depth (mm) 280
Projection (mm) 227
Flow Rate
Flow Rate at 1 Bar (l/min) 9.8
Flow Rate at 1.5 Bar (l/min) 11.8
Flow Rate at 2 Bar (l/min) 13.7
Flow Rate at 3 Bar (l/min) 16.9
Minimum Water PressureMore information 1

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Rated 4.40/5 from 5 customer reviews


Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.